Carbonarm terminal ball - Aluminum 25 mm 1 inch - M6 Ball M6 SF/M6
Carbonarm terminal ball - Aluminum 25 mm 1 inch - M6 Ball M6 SF/M6
Carbonarm terminal ball - Aluminum 25 mm 1 inch - M6 Ball M6 SF/M6
Carbonarm terminal ball - Aluminum 25 mm 1 inch - M6 Ball M6 SF/M6
Carbonarm terminal ball - Aluminum 25 mm 1 inch - M6 Ball M6 SF/M6
Carbonarm terminal ball - Aluminum 25 mm 1 inch - M6 Ball M6 SF/M6

Ball M6

€16.39
Tax Excluded

M6 starting Ball complete with stainless steel screw for underwater use

Ball diameter 2.5 cm (1”), 100% made in Italy, manufactured from high-quality anticorodal aluminum and anodized with a 40-micron military treatment to ensure maximum resistance to wear and saltwater corrosion over time.

Thanks to the through hole and the M6 screw, this ball can be mounted on trays, housings and other accessories with compatible M6 holes, providing an ideal anchor point for arms, lights and accessories, starting from a tightening clamp.

Friction function underwater: the ball is equipped with an O-ring that creates a friction effect when locked in a clamp. This system allows quick and precise orientation of the clamp and the entire set-up above it, without the need for continuous loosening or tightening. Underwater, it is sufficient to slightly loosen the clamp’s wing nut to adjust the position: thanks to the action of the O-ring, the clamp remains stable without requiring excessive tightening and is always ready to be repositioned if needed.

With use, the O-ring may wear over time; in this case, simply replace it with the dedicated spare kit.

Write to staff about: Ball M6
Read notice

Complete your experience with these accessories

Replacement o-ring kit for Carbonarm strobe-arms- 25 mm Kit o-ring for arms and handles with ball ACC/OR/AR Replacement o-ring kit for Carbonarm strobe-arms- 25 mm Kit o-ring for arms and handles with ball ACC/OR/AR 2
Other Accessories

Kit o-ring for arms and balls

ACC/OR/AR
€2.05
Tax Excluded
There are not enough products in stock
Replacement kit of n.10 O-rings for arms and 25 mm (1") Carbonarm balls.
Standard aluminum clip for 25 mm – 1 inch balls Standard Clamp CP/2 Standard aluminum clip for 25 mm – 1 inch balls Standard Clamp CP/2 2
Clamp

Ball Clamp

CP/2
€24.59
Tax Excluded
There are not enough products in stock
Clamp for 2.5 cm (1”) Balls for underwater use Clamp designed to ensure the optimal tightening of 2.5 cm (1”) diameter balls. It is made of high-quality anticorodal aluminum and treated with 40-micron military-grade anodization, which guarantees maximum resistance to wear and saltwater corrosion over time. The structure is composed of two aluminum...
Open Lock Clip Open – Carbonarm Open Clamp Standard CP/2A Open Lock Clip Open – Carbonarm Open Clamp Standard CP/2A 2
Clamp

Open Ball Clamp

CP/2A
€26.23
Tax Excluded
There are not enough products in stock
Open clamp for 2.5 cm (1”) Balls for underwater use Clamp designed to ensure the optimal tightening of 2.5 cm (1”) diameter balls. It is made of high-quality anticorodal aluminum and treated with 40-micron military-grade anodization, which guarantees maximum resistance to wear and saltwater corrosion over time. The structure is composed of two aluminum...
Long Lock Clip – Aluminum - Carbonarm Long Clamp CP/2L Long Lock Clip – Aluminum - Carbonarm Long Clamp CP/2L 2
Clamp

Long Ball Clamp

CP/2L
€31.97
Tax Excluded
There are not enough products in stock
Long clamp for 2.5 cm (1”) Balls for underwater use Clamp designed to ensure the optimal tightening of 2.5 cm (1”) diameter balls. It is made of high-quality anticorodal aluminum and treated with 40-micron military-grade anodization, which guarantees maximum resistance to wear and saltwater corrosion over time. The structure is composed of two aluminum...
Triple Aluminum Clip - For 25 mm – 1 inch Carbonarm balls Triple Clamp CP/3 Triple Aluminum Clip - For 25 mm – 1 inch Carbonarm balls Triple Clamp CP/3 2
HOMEPAGE - Più Venduti

Triple Ball Clamp

CP/3
€34.43
Tax Excluded
There are not enough products in stock
3-way mount Clamp for 2.5 cm (1”) Balls for attaching additional underwater camera accessories Clamp designed to ensure the optimal tightening of 2.5 cm (1”) diameter balls. It is made of high-quality anticorodal aluminum and treated with 40-micron military-grade anodization, which guarantees maximum resistance to wear and saltwater corrosion over time....
Triple Ball Lock Clip – Carbonarm Open Triple Clamp CP/3A Triple Ball Lock Clip – Carbonarm Open Triple Clamp CP/3A 2
Clamp

Open Triple Ball Clamp

CP/3A
€36.07
Tax Excluded
There are not enough products in stock
3-way mount open Clamp for 2.5 cm (1”) Balls for attaching additional underwater camera accessories Clamp designed to ensure the optimal tightening of 2.5 cm (1”) diameter balls. It is made of high-quality anticorodal aluminum and treated with 40-micron military-grade anodization, which guarantees maximum resistance to wear and saltwater corrosion over...
Quadruple Ball Lock Clip - Carbonarm Quadruple Clamp CP/4 Quadruple Ball Lock Clip - Carbonarm Quadruple Clamp CP/4 2
Clamp

Quadruple Ball Clamp

CP/4
€37.70
Tax Excluded
There are not enough products in stock
4-way mount Clamp for 2.5 cm (1”) Balls for attaching additional underwater camera accessories Clamp designed to ensure the optimal tightening of 2.5 cm (1”) diameter balls. It is made of high-quality anticorodal aluminum and treated with 40-micron military-grade anodization, which guarantees maximum resistance to wear and saltwater corrosion over time....
Quadruple Open Ball Lock Clip – Carbonarm Open Quadruple Clamp CP/4A Quadruple Open Ball Lock Clip – Carbonarm Open Quadruple Clamp CP/4A 2
Clamp

Open Quadruple Ball Clamp

CP/4A
€40.98
Tax Excluded
There are not enough products in stock
4-way mount open Clamp for 2.5 cm (1”) Balls for attaching additional underwater camera accessories Clamp designed to ensure the optimal tightening of 2.5 cm (1”) diameter balls. It is made of high-quality anticorodal aluminum and treated with 40-micron military-grade anodization, which guarantees maximum resistance to wear and saltwater corrosion over...
 
Height
4,0 cm
Sphere diameter
25 mm
Weight
25 g
SF/M6

You might also like

M8 ball terminal made for underwater use - Carbonarm Ball M8 SF/M8 M8 ball terminal made for underwater use - Carbonarm Ball M8 SF/M8 2
Balls and Terminals

Ball M8

CARBONARM
SF/M8
€16.39
Tax Excluded
There are not enough products in stock
M8 starting Ball for underwater use, equipped with a hex insert on the top, allowing the ball to be easily tightened with an Allen key. On the bottom, an M8 thread of approximately 7 mm protrudes. Ball diameter 2.5 cm (1”), 100% made in Italy, manufactured from high-quality anticorodal aluminum and anodized with a 40-micron military treatment to ensure...
Ball M3/8 SF/M3/8 Ball M3/8 SF/M3/8 2
Balls and Terminals

Ball 3/8" Whitworth

CARBONARM
SF/M3/8
€16.39
Tax Excluded
There are not enough products in stock
3/8" whitworth starting Ball for underwater use, equipped with a hex insert on the top, allowing the ball to be easily tightened with an Allen key. On the bottom, a 3/8" whitworth thread of approximately 7 mm protrudes. The 3/8" whitworth thread, together with the 1/4”  whitworth thread, is a widely used standard for mounting on tripods, camera supports...
Whitworth terminal ball – Carbonarm Ball Whitworth SF/WT Whitworth terminal ball – Carbonarm Ball Whitworth SF/WT 2
Balls and Terminals

Ball 1/4" Whitworth

CARBONARM
SF/WT
€16.39
Tax Excluded
There are not enough products in stock
1/4" whitworth starting Ball for underwater use, equipped with a hex insert on the top, allowing the ball to be easily tightened with an Allen key. On the bottom, a 1/4" whitworth thread of approximately 7 mm protrudes. The 1/4" whitworth thread, together with the 3/8”  whitworth thread, is a widely used standard for mounting on tripods, camera supports...
Clamp System for underwater photo video housing & arms
Product added to compare.