Balls and Terminals

Balls and adapters for clip terminals. For underwater photography and videography equipment. Aluminum balls 25 mm (1 inch).

Balls and Terminals

Computer's Support

CARBONARM.COM
ACC/BRA/DIVE
€64.75
Tax Excluded
There are not enough products in stock
Support for Dive Computers with a Storage Compartment, consisting of a tube in anodized aluminum and a fringe which is fixed bya ball (SF/M6). With a removable cap in Delrin, with O-ring that allows the use of the internal volume of the tube, such as storage watertight. For the configuration shown in the figure, it is recommended to use a Open Triple...
Balls and Terminals

Computer's Support L

CARBONARM.COM
ACC/BRA/DIVE/L
€64.75
Tax Excluded
There are not enough products in stock
Support for Dive Computers with a Storage Compartment, consisting of a tube in anodized aluminum and a fringe which is fixed a ball (SF/M6). With a removable Cap in Delrin, with O-ring that allows the use of the internal volume of the tube, such as storage watertight. For the configuration shown in the figure, it is racommended to use a Open Triple Clamp...
Balls and Terminals

Mirror

CARBONARM.COM
ACC/SPC
€64.75
Tax Excluded
There are not enough products in stock
This accessory has the function of "rear-view mirror," applied at the junction of the arms through a triple clamp CP/3 it allows to see what happens behind you.The front part comes with a 67 mm thread that allows to place additional lenses. The side hasM8 threaded holes, Kodak and M6 that allows to place balls SF/M8, SF/WT and SF/M6.
Balls and Terminals

Ball GoPRO

CARBONARM.COM
SF/GP
€23.77
Tax Excluded
There are not enough products in stock
Ball with GoPro adapter tripod. It is made out of anticorodal aluminum and anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt. This special ball allows to mount the GoProcamera to all Carbonarm systems such as polecams, grips, arms, clamps, etc. ... An o-ring at the center of the ball is placed to provide...
Balls and Terminals

Light Support Terminal

CARBONARM.COM
ACC/LUC/LED
€31.97
Tax Excluded
There are not enough products in stock
Universal accessory, adaptable to many strobes and pilot lights, complete with 4 o-rings of two different measures to allow to mount lights of different sizes.
Balls and Terminals

Ball M6

CARBONARM.COM
SF/M6
€16.39
Tax Excluded
There are not enough products in stock
M6 ball with a diameter of 2,5 cm, complete with a stainless steel screw. Anticorodal aluminum, anodized with 40 microns (military standard) to ensure maximum durability and excellent resistance to wear and to sea salt. It can be easily adapted to different supports, strobes, lights, and so on. An o-ring placed at the center of the ball is acts like a...
Balls and Terminals

Ball M8

CARBONARM.COM
SF/M8
€16.39
Tax Excluded
There are not enough products in stock
M8 ball, with M8 thread in the lower part and hexagonal insert in the upper part that allows to tighten it with a simple allen key. It is made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. It can be easily adapted to different supports, strobes,...
Balls and Terminals

Ball M3/8

CARBONARM.COM
SF/M3/8
€16.39
Tax Excluded
There are not enough products in stock
M8 Sphere complete thread M3 / 8 at the bottom and insert hex at the top that allows you to hold it with a simple allen key. E'in anticorodal aluminum, anodized and treated military 40 micron for maximum resistance against wear and salt in time.
Balls and Terminals

Universal Ball

CARBONARM.COM
SF/UN
€16.39
Tax Excluded
There are not enough products in stock
Universal ball with a 8mm diameter hole that allows to easily attach different underwater strobes (sea&sea and similar) to to strobe arms and other devices. It is made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. An o-ring placed at the center of...
Balls and Terminals

Ball Whitworth

CARBONARM.COM
SF/WT
€16.39
Tax Excluded
There are not enough products in stock
Ball with 2,5 cm diameter with Whitworth thread made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. This ball is designed to be mounted on all accessories, both photo and video (for example Go Pro, compact digital cameras, DSLR…) that are arranged...
Balls and Terminals

M6 Blind Threaded Ball

CARBONARM.COM
SF/MC
€16.39
Tax Excluded
There are not enough products in stock
M6 ball with inside blind thread, made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. It can be easily adapted to different supports, flash, lights, and so on. An o-ring at the center of the ball acts like a clutch: the ball tightened by the clamp...
Balls and Terminals

Whitworth Blind Threaded Ball

CARBONARM.COM
SF/MC/KODAK
€16.39
Tax Excluded
There are not enough products in stock
Whitworth (Kodak) ball with blind thread inside, made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. It can be easily adapted to different supports, flashes, lights, and so on. An o-ring at the center of the ball is acts like a clutch: the ball...
Balls and Terminals

Ball MCL

CARBONARM.COM
SF/MCL
€16.39
Tax Excluded
There are not enough products in stock
M6 ball with blind thread inside, height: 6cm, made out of anticorodal aluminum and anodized with 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt. It can be easily adapted to different arms, strobes, lights, etc.... An o-ring at the center of the ball provides optimal flexibility. The length of 6 cm allows, in...
Balls and Terminals

Starting Bayonet

CARBONARM.COM
BNT/PT
€9.84
Tax Excluded
There are not enough products in stock
Starting bayonet with 2 countersunk holes M5. Made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. M5 Screws are included in the price.
Balls and Terminals

Starting Bayonet Base

CARBONARM.COM
BAS/PT
€18.03
Tax Excluded
There are not enough products in stock
Bayonet base with inside threaded hole M6. It is made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. This accessory can be easily adapted to different supports for various housing models.
Balls and Terminals

Starting Bayonet Ball

CARBONARM.COM
SF/PT
€31.97
Tax Excluded
There are not enough products in stock
Starting ball composed of a bayonet base and a M6 ball made of anticorodal aluminum and anodized with 40 microns (military standard) 40 microns are used in the production to ensure maximum durability and excellent resistance to wear and to sea salt. This accessory can be easily adapted to different supports for various housing models and allows to easily...
Balls and Terminals

Starting Bayonet Ball 45

CARBONARM.COM
SF/PT45
€31.97
Tax Excluded
There are not enough products in stock
Starting ball composed of a bayonet base 45° and ball made of anticorodal aluminum, anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. This accessory can be easily adapted to different supports for various housing models and allows to easily remove complete arms like Carbonarm kits.
Quick Release

Starting Ball with Quick Release

CARBONARM.COM
SF/PT/SF
€40.16
Tax Excluded
There are not enough products in stock
Starting Ball with Quick Release. Buckle not included.Bracket Buckle for Scooter (ACC / SUP / SCO) allows you to connect various products (GoPro Case, Illuminators, etc ...) to a scuba scooter, and be able to quickly remove and reposition them in the water. It is also possible to place the Starting Ball on our housings.
Balls and Terminals

Starting Bayonet Base Double

CARBONARM.COM
BAS/PT2
€20.49
Tax Excluded
There are not enough products in stock
Bayonet base with 2 inside threaded hole M6. The base can be transformed into a Starting Ball or a 45 ° Starting Ball by inserting a Ball M6 (SF / M6). By inserting 2 Balls M6, it is possible to have a double attack. made out of anticorodal aluminum and anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to...
Balls and Terminals

Starting Ball (Predisposition for Second Ball 45°)

CARBONARM.COM
SF/PT/1
€34.43
Tax Excluded
There are not enough products in stock
Starting ball composed of starting base and M6 ball. It is made out of anticorodal aluminum and anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt. Version with second threaded hole M6, for the insertion of a M6 Ball at 45 °.
Balls and Terminals

Starting Ball 45° (Predisposition for Second Ball)

CARBONARM.COM
SF/PT45/1
€34.43
Tax Excluded
There are not enough products in stock
Starting ball composed of starting base and M6 ball. It is made out of anticorodal aluminum and anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt. Version with second threaded hole M6, for the insertion of a Second M6 Ball.
Balls and Terminals

Starting Ball Double

CARBONARM.COM
SF/PT/2
€48.36
Tax Excluded
There are not enough products in stock
Starting ball composed of starting base and Double M6 ball. It is made out of anticorodal aluminum and anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt.
Balls and Terminals

Hot Shoe Ball

CARBONARM.COM
SF/SL
€23.77
Tax Excluded
There are not enough products in stock
Ball, composed of a ball SF/MC with a diameter 25 mm and a flat contact flash adapter threaded M6, both made out of anticorodal aluminum and anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt. This ball is very useful to mount many accessories directly on housing's hot shoe.
Balls and Terminals

Suction Cup Support

CARBONARM.COM
SF/SCK
€64.75
Tax Excluded
There are not enough products in stock
Suction cup support with 25 mm Ball, which allows the positioning of cameras, action cams, Led Lamps or other accessories, on flat non-porous surfaces. Application handle that also allows easy removal.
Showing 1-24 of 27 item(s)
Product added to wishlist
Product added to compare.