|
€31.97
Light support ball for underwater use, equipped with a special universal mount adaptable to many video lights and pilot lights on the market.
Ball diameter 2.5 cm (1”), 100% made in Italy, manufactured from high-quality anticorodal aluminum and anodized with a 40-micron military treatment to ensure maximum resistance to wear and saltwater corrosion over time.
A light support accessory made of plastic is mounted on the ball, designed with an optimal shape for securing small video lights.
This ball comes with 4 O-rings in two different sizes, allowing the secure and stable attachment of lights of various dimensions and it can be mounted on all Carbonarm systems, including trays, handles, arms, clamps, and other accessories.
|
€64.75
Mirror lens holder with ball for underwater use
This accessory works as a real underwater rear-view mirror: mounted on the joint of the arms, for example through a triple clamp, it allows the diver to easily check what is happening behind them.
The mirror not only has a practical function but also a creative one: it allows you to capture original reflected shots – from the diver’s face to the surrounding environment – adding an artistic and unique touch to underwater images.
The front part is equipped with a 67 mm thread, compatible with additional lenses of this size, and can also be used as a lens holder when the lenses are not in use.
It also features M8, 1/4” Whitworth and M6 threaded holes, allowing the attachment of balls and additional accessories, making it an extremely versatile support.
Main features:
- Rear-view mirror function to check equipment and what is happening behind the diver.
- Possibility of creative shots with unique reflections.
- Front 67 mm thread: compatible with additional lenses.
- Can also be used as a lens holder when lenses are not in use.
- M8, 1/4” Whitworth and M6 threaded holes for accessories and extra balls.
- Compact, lightweight and multifunctional accessory.
The 2.5 cm (1”) ball and the mirror body, 100% made in Italy, are manufactured from high-quality anticorodal aluminum and anodized with a 40-micron military treatment to ensure maximum resistance to wear and saltwater corrosion over time.
Friction function underwater: the ball is equipped with an O-ring that creates a friction effect when locked in a clamp. This system allows quick and precise orientation of the clamp and the entire set-up above it, without the need for continuous loosening or tightening. Underwater, it is sufficient to slightly loosen the clamp’s wing nut to adjust the position: thanks to the action of the O-ring, the clamp remains stable without requiring excessive tightening and is always ready to be repositioned if needed.
With use, the O-ring may wear over time; in this case, simply replace it with the dedicated spare kit.
|
€4.92
Kit consisting of 2 stainless steel 316 Allen screws, Kodak thread, complete with key.
Allows you to securely fasten housings with Kodak mount to Carbonarm trays, ideal for use with action cam housings.
For optimal stability, it is recommended to use both screws: fastening with only one screw may cause the housing to rotate during use.
|
€2.05
Replacement kit of n.10 O-rings for arms and 25 mm (1") Carbonarm balls.
|
€16.39
The Velcro Kit is a simple yet extremely useful accessory, recommended for all Carbonarm arm systems or those of other brands.
The kit includes 2 Velcro straps, designed to keep your equipment secure during transport.
It allows you to lock the arms while transporting on the surface or during water or boat transfers, minimizing the risk of accidental bumps to lights or strobes.
Once in the water, the Velcro straps can be easily released, allowing the normal use of the arms without any limitation.
|
€118.85
Telescopic Boat Hook in Aluminum for Remote Filming.
Made of anticorodal aluminum, this telescopic pole features an SF/M6 ball terminal, ideal for mounting action cam housings using a clamp (not included). Perfect for using the housings directly from the boat, it ensures stability and ease of use during remote filming.
Compatible with housings for GoPro, Insta360 Ace Pro, DJI Osmo Action, Insta360 X3 and Insta360 X4.
Perfect for remote filming, providing stability and practicality during use.
|
€6.56
Block for trays made of anodized anticorodal aluminum with fixing holes for attachment to the tray.
This accessory is designed to stabilize underwater housings for compact digital cameras with a single central mounting hole, preventing movement or rotation during use.
It is compatible with Carbonarm trays of 25 and 30 cm and can be easily mounted using the included screws, through the dedicated holes on the trays.
Recommended for use with small-sized underwater housings.
|
€11.48
Adapter to be mounted on Carbonarm trays, equipped with a photographic thread.
Used in combination with the Action Cam Housing Adapter, it allows mounting of underwater housings for action cams on the brackets.
It attaches to the Carbonarm trays using the included screw and must be combined with the Action Cam Housing Adapter.
To increase the mounting height of the housing on the bracket, the Male-Female Adapter for Action Cam can be inserted between the Tray Adapter and the Housing Adapter, acting as an extension.
This adapter is made of polycarbonate and features stainless steel screws and thread. A plastic washer and Allen key are included.
Photographic thread:
- Screw diameter: 1/4″
- Threads per inch: 20 tpi
Attention: this adapter attaches to the bracket with a single screw. For a more stable mounting of the housing on the bracket, we recommend using the alternative accessory Kodak screw kit with Allen key, which allows attachment with two screws.
|
€11.48
Male-Female Adapter for housing and bracket adapters for Action Cams.
To increase the mounting height of the housing on the bracket, the Male-Female Adapter for Action Cam can be inserted between the Tray Adapter and the Housing Adapter, acting as an extension.
|
€13.11
Adapter to be mounted on Action Cam housings.
Used in combination with the Tray Adapter, it allows mounting of underwater housings for action cams on the trays.
It mounts on Carbonarm housings simply by screwing the circular part of the accessory and must be combined with the Tray Adapter for Action Cam Housings.
To increase the mounting height of the housing on the bracket, the Male-Female Adapter for Action Cam can be inserted between the Tray Adapter and the Housing Adapter, acting as an extension.
This adapter is made of polycarbonate and features stainless steel screws and thread.
Compatibility:
- Carbonarm housings for Action Cams: GoPro, Insta 360 Ace Pro, DJI Osmo Action
- Carbonarm ACtionDOME housings
Attention: this adapter, when combined with the Tray Adapter, attaches with a single screw. For a more stable mounting of the housing on the tray, we recommend using the alternative accessory Kodak screw kit with Allen key, which allows attachment with two screws.
|
€72.95
The Carbon Diffuser has been designed to spread light more evenly, ensuring soft and natural illumination even on close subjects.
The dome helps to widen and soften the light from your strobes or Revolution lights, delivering optimal performance even in waters with strong suspension.
Available in versions compatible with various strobe brands and with Revolution lights.
|
€31.97
Inon SD Lens Adapter
Compatible with Carbonarm underwater housings for GoPro, Insta360 Ace Pro, and DJI Osmo Action. The Inon SD Lens Adapter fits perfectly on Carbonarm underwater housings.
Allows the use of Inon lenses with SD mount, in particular:
- Inon UFL-G140 SD Fisheye
- Inon UCL-G165 SD Close-Up
The adapter is equipped with:
- a white locking screw to be tightened after fixing the lens
- an upper ring for passing the lens lanyard, as an additional safety system
Carbonarm designs and manufactures numerous support components with its own 3D printers, always using durable materials suitable for underwater use.
|
€23.77
Buckle tray for DPV strap, essential for connecting Carbonarm accessories to an underwater scooter.
Made of anticorodal aluminium and anodized with a 40-micron military-grade finish, it ensures extreme strength and durability, ideal for intensive use in saltwater.
The tray features two M5 threaded holes and one central M6 threaded hole, allowing the attachment of various accessories such as balls, quick-release mounts, or starting bayonets.
The size of the tray and the buckle design allow direct attachment to the DPV strap, making installation quick and secure.
|
€61.48
Quick-Release Buckle Tray Kit to be mounted on DPV Strap, designed to allow the use of underwater housings, lights and flashes on underwater scooters.
The tray and the quick-release system are made of anticorodal aluminium and anodized with a 40-micron military-grade finish, ensuring excellent strength and durability, ideal for intensive use in saltwater.
The quick-release system ends with a 25 mm (1”) ball, compatible with all Carbonarm clips and most accessories from other brands. Thanks to the modular Carbonarm system of clamps, balls and arms, it is possible to attach various accessories such as underwater housings, lights, and flashes, configuring and customizing the setup according to your specific photo or video needs.
The quick-release system allows you to detach and use the equipment by hand quickly and easily.
The size of the tray and the buckle design allow direct attachment to the DPV strap, making installation quick and secure.
|
€56.56
Smartphones are excellent tools for high-quality underwater videography and offer the advantage of a large screen, ensuring excellent visibility during dives.
The DiveshotR Sunshade, removable even underwater, provides clear screen visibility even in backlit conditions. It also features a flap that covers the sensors, preventing accidental commands when the housing is not in use during the dive.
Remove the sunshade to take selfies.
Easydive designs and produces numerous support accessories with its own 3D printers, selecting robust materials perfectly suited for underwater use.
|
€236.89
Pre-dive water leakage detection system for underwater housings.
The Vacuum System is a safety device designed to detect any water leakage: it creates a vacuum inside the underwater housing and allows you to check its watertight seal before the dive, drastically reducing the risk of leaks during immersion.
The Vacuum System is compatible with most underwater housings on the market equipped with an M14x1 port.
It is also compatible with the DiveshotR smartphone housing and, if purchased together with the latter, it comes already installed.
The package includes:
- Anodized aluminum valve body with valve and electronics
- Hand pump
Instruction manual available in the “Attachments” section below.
|
€28.69
Adapter ring for color correction filters or lenses with M67 thread, made of anodized anticorodal aluminum, providing effective protection against corrosion.
Recommended for use with housings for GoPro, Insta360 Ace Pro, DJI Osmo Action and DiveshotR.
Compatible with M67 color correction filter and Saga Macro lenses.
The ring attaches to the front hole of the housing via a knob with a threaded screw: its longitudinal slot allows easy adjustment of position and secure fastening.
Color filters and lenses with M67 thread screw directly onto the ring.
|
€61.48
Quick-Release Buckle Tray Kit to be mounted on DPV Strap, designed to allow the use of underwater housings for action cams on scooters.
The tray and the quick-release system are made of anticorodal aluminium and anodized with a 40-micron military-grade finish, ensuring excellent strength and durability, ideal for intensive use in saltwater.
The quick-release ends with a fin-style mount for action cams, made of plastic material with stainless steel hardware.
The quick-release system allows you to detach and use the equipment by hand quickly and easily.
The size of the tray and the buckle design allow direct attachment to the DPV strap, making installation quick and secure.
Attention: this solution, designed for action cams, does not allow housing rotation during shooting. For rotation, we recommend the following configuration:
- Quick-Release Buckle Tray Kit for DPV + CP/2 Clamp + GoPro Ball SF/GP + Adapter for Action Cam Housing
|
€61.48
Quick-Release Buckle Tray Kit to be mounted on DPV Strap, designed to allow the use of underwater lamps on underwater scooters.
The tray and the quick-release system are made of anticorodal aluminium and anodized with a 40-micron military-grade finish, ensuring excellent strength and durability, ideal for intensive use in saltwater.
The quick-release system ends with an universal plastic light mount, compatible with many commercial lamps and pilot lights, and includes 4 o-rings in two different sizes to fit lights of varying dimensions.
The quick-release system allows you to detach and use the equipment by hand quickly and easily.
The size of the tray and the buckle design allow direct attachment to the DPV strap, making installation quick and secure.
|
€18.85
Universal carabiner with internal stainless steel wire coated with a plastic sheath, designed to ensure maximum safety for your underwater photo and video equipment, both during dives and out of the water.
Practical and quick to attach, it prevents accidental loss of equipment and allows it to be securely fastened when not in use.
The system consists of two ends:
- Cord loop to connect directly to the housing’s eyelet or one of the tray slots.
- Carabiner to clip onto the BCD during dives when not filming or to an external support out of the water.
Compact, corrosion-resistant and easy to use, it is the essential accessory to enjoy freedom of movement and safety on every dive.
|
€16.39
Protective caps for the front and rear screens of Carbonarm underwater housings for Action Cams. For the ActionDome housing, only the rear screen cap is available, since the front part features a dome instead of a screen.
Made of durable plastic, the caps protect the screens from accidental bumps and scratches during transport and can be easily pressed directly onto the surface.
Accessory compatible with housings for GoPro, Insta360 Ace Pro, DJI Osmo Action, and with ActionDome housings.
Protect the screens of your housing with custom-molded plastic caps.
|
€15.57
Spare Battery for CREE 1000 Lumen
3.7v 3100mAh Panasonic
|
€7.38
Replacement Zinc compatible with all Carbonarm housings.
Zinc is a crucial component, installed on housings to protect all metal parts from galvanic currents. Made of softer metal, it attracts corrosive currents, thereby preserving the housing.
With use, the zinc wears down and takes on a worn appearance: this is completely normal and indicates that the protective function is working correctly.
It is recommended to replace it according to how often the housing is used, typically once a year.
|
€8.20
Protect the rear screen of your housing with this protective film, easy to apply and scratch-resistant.
Electrostatic film without adhesives, designed exclusively for application on the back screen of the housing.
During the first application, small bubbles may appear, but they will disappear after the first dive.
It is strongly recommended not to apply films on the front part of the housing, especially adhesive films, to avoid damaging the ultra-clear polycarbonate front panel.
Available for housings for Action Cams (GoPro, Ace Pro, Osmo Action, Action Dome) and for the DiveshotR housing.
|
€8.20
O-Ring Kit containing only the o-rings replaceable by the user: the kit includes n.2 replacement o-rings for the housing back closure, sufficient for a single replacement.
The o-rings are made of a special high-hardness rubber, designed to ensure long-lasting durability and resistance to contact with both air and water. With proper lubrication and maintenance, they will remain effective for a long time.
For further details, please read our maintenance tips.
Kit available for Action Cams, Insta360 X3/4 and DiveshotR housings.
|
€40.16
Color correction filter with M67 mount
- Red, recommended for tropical or Mediterranean waters with excellent visibility.
- Orange, recommended for tropical or Mediterranean waters with excellent visibility.
- Magenta, recommended for lake or river waters, to correct the green component.
- Yellow, recommended for capturing underwater fluorescence.
To mount these filters on Carbonarm housings, it is necessary to use the M67 filter and lens adapter accessory or the single or double Flip support.
|
€64.75
Neoprene bag with included shoulder strap, featuring an elongated shape, ideal for carrying and protecting the DiveshotR smartphone case.
Perfect for transporting your underwater equipment during trips or travel, or for easily reaching the diving center.
Thanks to its compact shape, it can be easily placed inside a suitcase.
|
€19.67
Cordura Shoulder Strap for carrying underwater equipment or as a replacement for the Sleeve Bag
Shoulder strap made of high-strength Cordura, lightweight and comfortable, designed to ensure safe and convenient transport of your underwater equipment during surface transfers or between dives.
The adjustment ring and hooks are made of stainless steel, corrosion-resistant and perfectly suitable for marine environments, ensuring durability and reliability even under extreme conditions.
The ergonomic design evenly distributes weight, reducing fatigue during prolonged use, while the attachment system allows the strap to be securely fastened.
|
€9.02
Silicone Grease for O-Ring Lubrication.
Keeping the o-rings of your housings properly lubricated is essential to ensure optimal sealing and preserve the performance of the housing over time.
Carbonarm recommends always having a tube of silicone grease on hand to carry out proper routine maintenance of the housing.
|
€9.84
Replacement cap for M14 threaded hole of Carbonarm underwater housings, designed as a connection port for an external battery pack or a Wi-Fi antenna cable.
If the original cap supplied with the housing is damaged or lost, this spare part allows you to easily restore the closure.
- Size: M14
- Material: stainless steel with sealing o-ring
- Assembly: 5 mm Allen key (not included)
Compatible with all Carbonarm housings.
|
€6.56
Ring for Strap and Carabiner
Stainless steel ring designed to be mounted on the long clamps of your configuration.
It allows you to securely attach a strap or a carabiner to the clamp, making it possible to carry your equipment on the shoulder while moving on the surface or between dives.
Made of stainless steel, it ensures corrosion resistance and maximum reliability even in saline environments.
A simple yet extremely useful accessory to improve the handling and mobility of your underwater equipment.
|
€32.79
Strap and Rings Kit
Kit consisting of a high-strength, lightweight, and comfortable Cordura strap and two stainless steel rings. The strap allows you to carry your underwater equipment comfortably on your shoulder during surface transfers or between dives.
The rings are designed to be mounted on the long clamps of your setup and ensure corrosion resistance and maximum reliability, even in marine environments.
|
€68.85
The kit includes an M67 adapter and an orange filter.
The adapter ring is made of anodized anticorodal aluminum, which provides effective protection against corrosion.
Recommended for use with GoPro, Insta360 Ace Pro, DJI Osmo Action, and DiveshotR housings.
It attaches to the front hole of the housings using a knob with a threaded screw: its longitudinal slot allows for easy adjustment of position and secure fastening.
The orange filter included in the kit screws directly onto the adapter ring.
|
€352.46
Fisheye wide angle lens for GoPro and Action Cams, allows you to get a viewing angle of 140 ° and a focus at only 4cm from the lens. Compatible with GoPro Hero Case Carbonarm, with the purchase of the special adapter.
|
€245.08
The UCL-G165 SD lens is a so-called "wide close-up lens" specifically designed for GoPro cameras based on its optical characteristic supporting closer minimum focus distance underwater, enabling high magnification/close-up imaging. Compatible with GoPro Hero Carbonarm with optional adapter (not included).
|
€143.44
Saga Lens, made in Spain. During the construction of these lenses the goal was to make them as light and small as possible.
The thread is of M-67 and the final diameter of 61 mm, this will provide you the better flash light when we are at the minimum focusing distance, also the smallest diameter that can allow us to further lower the center of the image if the subject to be photographed is in a flat.
|
€176.23
Saga lens, made in Spain. During the construction of these lenses the goal was to make them as light and small as possible.
The thread is M-67 and the final diameter is 61 mm, this will provide you with a better flash light when you are at the minimum focussing distance, also the smallest diameter that can allow us to further lower the center of the image if the subject to be photographed is in a flat.
|
€48.36
Is the Neoprene Cover not enough for you? Choose the Strong Cover for Housing Insta360 X3, and you will effectively protect your Dome from accidental shocks or falls.
|
€48.36
Neoprene cover to protect Housing Insta360 X3/4
|
€975.41
Product being restocked, temporarily unavailable.
Aluminum housing for Insta360 One X3 guaranteed up to -150 meters
Capture immersive 360° videos in 5.7K or turn your camera into a true action cam, without missing a single detail around you. In post-production, you can select the best angle and change the scene in one seamless sequence. Don’t miss the chance to take your underwater adventures to the next level. Choose our aluminum housing and get ready to capture unforgettable memories!
Why choose an aluminum housing for Insta360 One X3:
- Strength and durability: made of anticorodal aluminum with a 40-micron military anodization, designed to provide maximum strength and protection against wear and saltwater corrosion.
- Extreme protection: resistant up to -150 meters depth, aluminum offers superior heat dissipation compared to plastic, preventing the camera from overheating.
- No condensation: unlike plastic housings, aluminum eliminates internal fogging, ensuring clear and sharp images every time.
- Superior 360° quality: zenith and nadir appear much more defined compared to plastic housings, improving overall video quality.
- Full control: thanks to 4 mechanical buttons and the camera’s “housing” mode, you can access all functions easily and intuitively.
- Optimized for underwater shooting: set the camera to “Underwater” mode and, if needed, refine the stitching in post-production — though in most cases the automatic processing is already excellent.
Accessory compatibility:
- Remote Control Kit 5 or 15 meters: allows camera control and 360° live viewing directly from the surface.
- Telescopic Boat Hook: ideal both for use from the boat and underwater (*)
- DPV system: perfect for mounting the housing on underwater scooters (*)
- Modular supports: with Carbonarm handles, clamps, balls and arms, you can flexibly configure your setup to fit your filming needs.
For the best experience, we recommend pairing the housing with a Telescopic Boat Hook or a DPV system.
Insta360 One X3 camera not included.
Warning: during transport, leave the housings partially closed and not completely sealed. Pressure variations (particularly during air travel, but not only) may generate internal depression which, if the housing were hermetically sealed, would make opening extremely difficult.
|
€31.97
Universal Cleaning Kit for Plexiglass Domes
This kit is designed for the maintenance and polishing of plexiglass domes and is compatible with the following Carbonarm products:
- Housing Insta360 One X3
- Housing ActionDOME
The set includes three different polishing creams which, depending on the type and depth of the scratch, allow effective polishing of the plexiglass dome surface, restoring its transparency.
The kit also includes a specific polishing cloth.
|
€40.16
This flap covers the sensors of the DiveshotR housing, preventing accidental commands when the housing is not in use during the dive.
Recommended for Android smartphones.
|
€71.31
Divevolk Seatouch 4 Max Expansion Clamp with 67mm adapters arm.
Necessary to equip the Seatouch Max 4 Housing, with a tray and to add M67 filters or lenses.
|
€31.97
The Neoprene Cover is the ideal accessory to keep your underwater housing for Action Cam always protected and in perfect condition.
Made of high-quality neoprene, it combines protection and practicality, offering several advantages:
- Non-slip: the neoprene surface ensures a secure grip even with wet hands.
- Shockproof: the soft material absorbs impacts and vibrations, reducing the risk of accidental damage.
- Scratch and dust protection: preserves the screens and the finish of the housing.
Available for underwater housings for GoPro, Insta360 Ace Pro and DJI Osmo Action.
Protect your underwater housing with a practical, durable, and stylish cover!
|
€811.48
Compatible with Insta360 Ace Pro and Ace Pro 2 + GoPro Hero 13, 12, 11, 10, and 9
Why settle for 90°? Thanks to the ActionDOME with a 160 mm spherical dome port, you get a 135° field of view underwater while keeping the same wide angle as on the surface. The structure is lightweight, sturdy, and practical, ideal even for long shooting sessions.
No flat glass in front of the lens, no loss of field of view. The spherical dome allows the lens to work exactly as it does on the surface, with no intermediate elements reducing quality or sharpness. The result: outstanding photos and videos, with realistic colors and details in every situation.
With just one housing, you can use both the Insta360 Ace Pro and the GoPro. Simply insert the optional GoPro adapter to switch from one camera to the other without needing two separate housings.
Each housing is made of anodized aluminum, resistant to wear and marine corrosion. This choice not only ensures durability but also eliminates the risk of internal condensation caused by humidity or temperature changes, a common problem in plastic housings.
Compact, reliable, and versatile, the housing operates down to -150 m and comes with a lifetime warranty. Designed to last over time and to protect your action cam even during the most demanding dives.
Ideal for safe and high-performance underwater filming, whether amateur or professional, and especially appreciated by content creators worldwide.
Capture stunning images and videos down to -150 meters.
Warning: during transport, leave the housings partially closed and not completely sealed. Pressure variations (particularly during air travel, but not only) may generate internal depression which, if the housing were hermetically sealed, would make opening extremely difficult.
|
€4.10
Key lock caps. for Carbonarm ActionDOME Case.
They help you lock the buttons you shouldn't use underwater.
|
€8.20
Adapter for GoPro Hero 9/10/11/12/13 for Carbonarm ActionDOME Case
This adapter is essential for using the GoPro with the ActionDOME housing.
|
€97.54
DIVEVOLK Wide Angle Lens for SeaTouch 4 Max smartphone housing
- Prevents image distortion
- Requires Divevolk Adapter for Bracket and M67 lens or filter
|
€975.41
Aluminium underwater housing for Insta360 X4 tested to -150 m
360° videos are increasingly in demand due to their immersive potential and high image quality. Carbonarm is the first and only company to bring this technology to the world of diving to a depth of -150 metres, guaranteeing extraordinary footage.
Made entirely of anodised aluminium, the Insta360 X4 housing allows you to:
- create spectacular 8K 360° videos
- use your X4 like a traditional action camera, without ever missing anything around you. In post-production, you can freely choose the most interesting shot, rotate the scene and create perfect sequence shots with a single click
The compact and precise design makes the housing almost invisible when diving, ensuring smooth and unobstructed stitching in Zenith. Watch the video at the bottom of the page to discover the quality you can achieve.
To use the Insta360 X4 with the housing, you need to set the “underwater case” mode: enter the quick menu by scrolling down on the touchscreen, find the “Dive Case Mode” option and activate it. This will give you access to the main controls - on/off, record/pause, mode change - and the stitching software will work optimally during dives.
For best performance, we recommend using it with Boat Hook or DPV Strap + Quick Release Buckle Tray Kit for DPV + Carbonarm 34 + ball clamp + M6 ball (to be mounted on the housing).
Don't miss the opportunity to take your underwater adventures to the next level. Choose the Carbonarm aluminium underwater housing for Insta360 X4 and get ready to capture unforgettable memories on every dive.
Insta360 X4 camera not included in the price.
Warning: during transport, leave the housings partially closed and not completely sealed. Pressure variations (particularly during air travel, but not only) may generate internal depression which, if the housing were hermetically sealed, would make opening extremely difficult.
|
€69.67
Add this threaded M67 ring to your Single Flip system to easily and independently turn it into a Dual Flip system.
Compatible with the Single Flip Support for Action Cams and DiveshotR.
This accessory allows you to convert the single lens support into the dual version, offering greater versatility and creative possibilities for your shoots.
Make your Flip support even more efficient and explore new shooting techniques to capture every detail with precision and quality. Don’t miss this opportunity to enhance your equipment!
|
€15.57
Rigid plastic lens centering ring, compatible with the new flip supports for action cams and DiveshotR.
This accessory helps you perfectly align your lenses with the lens of your camera or action cam, ensuring sharp and perfectly centered images.
|
€15.57
Adapter for Inon lenses to be mounted on Flip supports for Action Cams and DiveshotR.
Made of ABS, this adapter allows you to easily and securely mount Inon Macro and Wide lenses with SD or ZD mount on single or double Flip supports, ensuring maximum compatibility and versatility.
Assembly is done using the 3 screws included in the package.
Available in both SD and ZD versions.
|
€105.74
This accessory is ideal for quickly adding a macro lens, wide-angle lens or color correction filter during filming, keeping your hands free and ensuring a smooth, uninterrupted underwater shooting experience. A must-have for those who want to fully exploit the creative potential of their Action Cam!
Recommended for use with GoPro, Insta360 Ace Pro and DJI Osmo Action housings, the single Flip support is made of robust 40-micron anodized aluminum, offering high resistance and long-lasting durability.
Equipped with an M67 mount, it can be paired with an adapter accessory for INON SD or ZD lenses (not included).
To switch quickly and easily from macro to wide-angle shots underwater, we recommend the double Flip version. It is always possible to purchase later the Additional Ring for Single Flip Support, which allows you to convert the single version of the Flip into the double version. Users can install it themselves.
|
€163.11
This accessory is ideal for quickly adding a macro lens, wide-angle lens or a color correction filter during shooting, keeping your hands free and ensuring a smooth, uninterrupted experience underwater. A must-have for anyone who wants to fully exploit the creative potential of their Action Cam!
Recommended for use with housings for GoPro, Insta360 Ace Pro, DJI Osmo, the Double Flip Mount is made of solid 40-micron anodized aluminum, offering high resistance and long-lasting durability.
Its rings are designed with M67 thread but can also be integrated with the INON SD or ZD lens adapter accessory (not included).
The Double Flip version allows you to switch quickly and easily from macro to wide-angle shooting underwater.
|
€113.93
This accessory is ideal for quickly adding a macro lens or a color correction filter during filming, keeping your hands free and ensuring a smooth, uninterrupted experience underwater. A must-have for those who want to fully unleash the creative potential of their Smartphone!
Recommended for use with DiveshotR housings, the single Flip support is made of robust 40-micron anodized aluminum, offering high resistance and long durability.
Equipped with an M67 mount, it can be integrated with an adapter accessory for INON SD or ZD lenses (not included).
To switch quickly and easily from the macro lens to the color filter underwater, we recommend purchasing the double Flip version. It is always possible to purchase later the Additional Ring for Single Flip Support, which allows you to convert the single version of the Flip into the double version. Users can install it themselves.
|
€179.51
This versatile accessory allows you to quickly apply macro lenses and color correction filters while filming with your smartphone, keeping your hands free and ensuring a smooth, uninterrupted experience underwater. A must-have for those who want to fully unleash the creative potential of their Smartphone!
Recommended for use with DiveshotR housings, the double Flip support is made of robust 40-micron anodized aluminum, offering high resistance and long durability.
Equipped with an M67 mount, it can be integrated with an adapter accessory for INON SD or ZD lenses (not included).
|
|
€48.36
Inon ZD Lens Adapter
Compatible with Carbonarm underwater housings for GoPro and Insta360 Ace Pro. The Inon ZD Lens Adapter fits perfectly on Carbonarm underwater housings.
It allows the use of Inon lenses with ZD mount, in particular:
The adapter is equipped with:
- a safety lock system and release button
- an upper ring for passing the lens lanyard, as an additional safety system
Carbonarm designs and manufactures numerous support components with its own 3D printers, always using durable materials suitable for underwater use.
|
€12.21
Plastic Button Covers for Underwater Action Cam Housings
This practical accessory is designed to improve the usability of underwater housing buttons for action cams during dives. Thanks to their larger contact surface, these button covers make pressing easier and more precise, even when wearing diving gloves.
Compatible with underwater housings for GoPro, Ace Pro, Osmo Action and Action Dome, they ensure better button responsiveness without compromising the waterproof seal.
They easily snap onto the housing’s buttons.
The kit includes 2 durable plastic button covers.
|
€24.43
Plastic Button Covers for Underwater Insta360 X3 Housings
This practical accessory is designed to improve the usability of underwater housing buttons for Insta360 X3 during dives. Thanks to their larger contact surface, these button covers make pressing easier and more precise, even when wearing diving gloves.
Compatible with underwater housings for Insta360 X3, they ensure better button responsiveness without compromising the waterproof seal.
They easily snap onto the housing’s buttons.
The kit includes 4 durable plastic button covers.
|
€40.16
Carbonarm housings for Action Cams are designed to be extremely robust and durable. To preserve their functionality over time, it is important to follow the instructions in the Maintenance and Lifetime Warranty section.
Carbonarm provides fast maintenance service worldwide and offers necessary spare parts, always ensuring full efficiency and long-lasting performance of your equipment.
During use, impacts or scratches may damage the housing screens, making replacement advisable. Keeping the screens in perfect condition is essential to:
- Maintain maximum image clarity: high-quality plexiglass ensures faithful image reproduction even in low-light conditions
- Ensure maximum reliability underwater: the included gasket guarantees perfect waterproofing up to the operational depth of -250 meters
If the screens are damaged, you can either send the housing to us for maintenance or replace the screens yourself; note: this operation is recommended only for those with good manual skills.
After replacement, it is mandatory to perform a test dive without a camera inside to verify full waterproofing.
Both front and rear screen kits are available.
Kit contents:
- Replacement screen with pre-installed o-ring
- Sealing o-ring
- 4 fixing screws
Kit available for Action Cam housings: GoPro, Insta 360 Ace Pro, and DJI Osmo Action
|
€36.89
Protect the dome port of your ActionDOME underwater housing!
|
€113.93
Rigid and waterproof case, designed to provide maximum protection for your underwater equipment in any environment. Built with durable materials and in compliance with high quality standards, it keeps your accessories safe, dry and protected even in extreme conditions. It is the ideal choice for transporting Carbonarm products in an orderly and secure way: housings, trays, arms, lights and all the accessories you wish to carry with you.
The internal structure is designed to adapt to your needs: the lid features an egg-crate foam layer, while the base contains a cubed foam layer, easily customizable to fit the shape of your equipment. With the removable cube system, you can configure the internal space in just a few seconds, creating perfectly shaped compartments for each component.
The high-density foam effectively absorbs shocks, preventing unwanted movement during transport.
The cases are particularly versatile, ensuring excellent adaptability to a wide range of applications, including boating, photography and video recording, scuba diving, outdoor sports, military use and special forces.
|
€72.95
Rigid and waterproof case, designed to provide maximum protection for your underwater equipment in any environment. Built with durable materials and in compliance with high quality standards, it keeps your accessories safe, dry and protected even in extreme conditions. It is the ideal choice for transporting Carbonarm products in an orderly and secure way: housings, trays, arms, lights and all the accessories you wish to carry with you.
The internal structure is designed to adapt to your needs: the lid features an egg-crate foam layer, while the base contains a cubed foam layer, easily customizable to fit the shape of your equipment. With the removable cube system, you can configure the internal space in just a few seconds, creating perfectly shaped compartments for each component.
The high-density foam effectively absorbs shocks, preventing unwanted movement during transport.
The cases are particularly versatile, ensuring excellent adaptability to a wide range of applications, including boating, photography and video recording, scuba diving, outdoor sports, military use and special forces.
|
€12.30
Replacement protection cap for the DiveshotR housing.
If you have lost the one supplied, you can easily purchase a replacement cap, essential for properly protecting the front screen of the housing.
|
€12.21
Plastic Button Covers for Underwater Insta 360 X4 Housings
This handy accessory is designed to improve the usability of the buttons on Insta 360 X4 underwater housings during dives. Thanks to their larger contact surface, these key covers make pressing easier and more precise, even when wearing diving gloves.
Compatible with Insta 360 X4 underwater housings, they ensure better responsiveness of the controls without compromising the watertight seal of the housing.
They snap directly onto the housing buttons.
The kit includes 2 durable plastic key covers.
|
