Carbonarm 25mm start ball 25 with bayonet fitting Starting Bayonet Ball SF/PT
Carbonarm 25mm start ball 25 with bayonet fitting Starting Bayonet Ball SF/PT
Carbonarm 25mm start ball 25 with bayonet fitting Starting Bayonet Ball SF/PT
Carbonarm 25mm start ball 25 with bayonet fitting Starting Bayonet Ball SF/PT
Carbonarm 25mm start ball 25 with bayonet fitting Starting Bayonet Ball SF/PT
Carbonarm 25mm start ball 25 with bayonet fitting Starting Bayonet Ball SF/PT

Bayonet mount starting Ball

€31.97
Tax Excluded

Bayonet mount starting Ball

Accessory consisting of a base with bayonet mount and an M6 ball, both made of anticorodal aluminum and anodized with a 40-micron military-grade treatment, ensuring maximum resistance to wear and salt corrosion over time.

This accessory quickly attaches to trays or housings equipped with a starting T-bayonet and allows for easy and rapid removal of arms or other mounted accessories. The M6 ball allows integration with the entire Carbonarm accessory system, including clamps, arms, and additional components.

Friction function underwater: the 2.5 cm (1”) ball is equipped with an O-ring that creates a friction effect when locked in a clamp. This system allows quick and precise orientation of the clamp and the entire set-up above it, without the need for continuous loosening or tightening. Underwater, it is sufficient to slightly loosen the clamp’s wing nut to adjust the position: thanks to the action of the O-ring, the clamp remains stable without requiring excessive tightening and is always ready to be repositioned if needed.

With use, the O-ring may wear over time; in this case, simply replace it with the dedicated spare kit.

Write to staff about: Bayonet mount starting Ball
Read notice

Complete your experience with these accessories

Replacement o-ring kit for Carbonarm strobe-arms- 25 mm Kit o-ring for arms and handles with ball ACC/OR/AR Replacement o-ring kit for Carbonarm strobe-arms- 25 mm Kit o-ring for arms and handles with ball ACC/OR/AR 2
Other Accessories

Kit o-ring for arms and balls

ACC/OR/AR
€2.05
Tax Excluded
There are not enough products in stock
Replacement kit of n.10 O-rings for arms and 25 mm (1") Carbonarm balls.
Starting T bayonet made of aluminum. M5 Carbonarm screws Starting Bayonet BNT/PT Starting T bayonet made of aluminum. M5 Carbonarm screws Starting Bayonet BNT/PT 2
Balls and Terminals

Starting T-bayonet

CARBONARM
BNT/PT
€9.84
Tax Excluded
There are not enough products in stock
T-Bayonet Base complete with M5 screws for underwater use. Starting bayonet with 2 countersunk M5 holes and T1 mount, 100% Made in Italy, manufactured in high-quality anticorodal aluminum and anodized with a 40-micron military treatment to ensure maximum resistance to wear and saltwater corrosion over time. This accessory can be fixed onto trays,...
Standard aluminum clip for 25 mm – 1 inch balls Standard Clamp CP/2 Standard aluminum clip for 25 mm – 1 inch balls Standard Clamp CP/2 2
Clamp

Ball Clamp

CP/2
€24.59
Tax Excluded
There are not enough products in stock
Clamp for 2.5 cm (1”) Balls for underwater use Clamp designed to ensure the optimal tightening of 2.5 cm (1”) diameter balls. It is made of high-quality anticorodal aluminum and treated with 40-micron military-grade anodization, which guarantees maximum resistance to wear and saltwater corrosion over time. The structure is composed of two aluminum...
Open Lock Clip Open – Carbonarm Open Clamp Standard CP/2A Open Lock Clip Open – Carbonarm Open Clamp Standard CP/2A 2
Clamp

Open Ball Clamp

CP/2A
€26.23
Tax Excluded
There are not enough products in stock
Open clamp for 2.5 cm (1”) Balls for underwater use Clamp designed to ensure the optimal tightening of 2.5 cm (1”) diameter balls. It is made of high-quality anticorodal aluminum and treated with 40-micron military-grade anodization, which guarantees maximum resistance to wear and saltwater corrosion over time. The structure is composed of two aluminum...
Long Lock Clip – Aluminum - Carbonarm Long Clamp CP/2L Long Lock Clip – Aluminum - Carbonarm Long Clamp CP/2L 2
Clamp

Long Ball Clamp

CP/2L
€31.97
Tax Excluded
There are not enough products in stock
Long clamp for 2.5 cm (1”) Balls for underwater use Clamp designed to ensure the optimal tightening of 2.5 cm (1”) diameter balls. It is made of high-quality anticorodal aluminum and treated with 40-micron military-grade anodization, which guarantees maximum resistance to wear and saltwater corrosion over time. The structure is composed of two aluminum...
Triple Aluminum Clip - For 25 mm – 1 inch Carbonarm balls Triple Clamp CP/3 Triple Aluminum Clip - For 25 mm – 1 inch Carbonarm balls Triple Clamp CP/3 2
HOMEPAGE - Più Venduti

Triple Ball Clamp

CP/3
€34.43
Tax Excluded
There are not enough products in stock
3-way mount Clamp for 2.5 cm (1”) Balls for attaching additional underwater camera accessories Clamp designed to ensure the optimal tightening of 2.5 cm (1”) diameter balls. It is made of high-quality anticorodal aluminum and treated with 40-micron military-grade anodization, which guarantees maximum resistance to wear and saltwater corrosion over time....
Triple Ball Lock Clip – Carbonarm Open Triple Clamp CP/3A Triple Ball Lock Clip – Carbonarm Open Triple Clamp CP/3A 2
Clamp

Open Triple Ball Clamp

CP/3A
€36.07
Tax Excluded
There are not enough products in stock
3-way mount open Clamp for 2.5 cm (1”) Balls for attaching additional underwater camera accessories Clamp designed to ensure the optimal tightening of 2.5 cm (1”) diameter balls. It is made of high-quality anticorodal aluminum and treated with 40-micron military-grade anodization, which guarantees maximum resistance to wear and saltwater corrosion over...
Quadruple Ball Lock Clip - Carbonarm Quadruple Clamp CP/4 Quadruple Ball Lock Clip - Carbonarm Quadruple Clamp CP/4 2
Clamp

Quadruple Ball Clamp

CP/4
€37.70
Tax Excluded
There are not enough products in stock
4-way mount Clamp for 2.5 cm (1”) Balls for attaching additional underwater camera accessories Clamp designed to ensure the optimal tightening of 2.5 cm (1”) diameter balls. It is made of high-quality anticorodal aluminum and treated with 40-micron military-grade anodization, which guarantees maximum resistance to wear and saltwater corrosion over time....
Quadruple Open Ball Lock Clip – Carbonarm Open Quadruple Clamp CP/4A Quadruple Open Ball Lock Clip – Carbonarm Open Quadruple Clamp CP/4A 2
Clamp

Open Quadruple Ball Clamp

CP/4A
€40.98
Tax Excluded
There are not enough products in stock
4-way mount open Clamp for 2.5 cm (1”) Balls for attaching additional underwater camera accessories Clamp designed to ensure the optimal tightening of 2.5 cm (1”) diameter balls. It is made of high-quality anticorodal aluminum and treated with 40-micron military-grade anodization, which guarantees maximum resistance to wear and saltwater corrosion over...
 
Height
5,5 cm
Diameter
35 mm
Sphere diameter
25 mm
Weight
71 g
SF/PT

You might also like

Starting Ball – Carbonarm Underwater Strobe Arm Systems Starting Ball with Quick Release SF/PT/SF Starting Ball – Carbonarm Underwater Strobe Arm Systems Starting Ball with Quick Release SF/PT/SF 2
Quick Release

Quick-release starting Ball

CARBONARM
SF/PT/SF
€40.16
Tax Excluded
There are not enough products in stock
Quick-release starting Ball Accessory consisting of a quick-release base and an M6 ball, both made of anticorodal aluminum and anodized with a 40-micron military treatment to ensure maximum resistance to wear and saltwater corrosion over time. This accessory quickly attaches to trays, particularly DPV trays, and its quick-release system allows fast and...
Clamp System for underwater photo video housing & arms
Product added to compare.