• Pack
Arms Kit | Floating Arm | Carbonarm 60/65 Carbonarm Float 60/65 ARM/STD6065
Arms Kit | Floating Arm | Carbonarm 60/65 Carbonarm Float 60/65 ARM/STD6065
Arms Kit | Floating Arm | Carbonarm 60/65 Carbonarm Float 60/65 ARM/STD6065
Arms Kit | Floating Arm | Carbonarm 60/65 Carbonarm Float 60/65 ARM/STD6065

Carbonarm Float 6065

€244.26
Tax Excluded

Underwater floating arm kit for heavier lights and strobes, composed of:

  • 1 Carbonarm Floating 7022 arm
  • 1 Carbonarm 18 arm
  • 2 clamps
  • 1 long clamp

This floating kit reduces the negative buoyancy in water of lights, strobes and housings, compensating for a weight of about 345 g.

The arms, made of "100% Made in Italy carbon fiber", ensure lightness, resistance to saltwater and wear, and are designed to deliver reliable and long-lasting performance.

The carbon tubes are of superior quality, easily recognizable by the fine finish and the regularity of the weave.

The terminal balls are made of anticorodal aluminum, anodized with a 40-micron military-grade treatment, ensuring exceptional durability and high resistance even in the most extreme conditions.

Each ball is fixed to the tube with a special glue, carefully selected and tested over time, guaranteeing perfect and long-lasting sealing.

The clamps, 100% made in Italy, are designed to ensure optimal tightening of 2.5 cm (1") diameter balls. They are made of high-quality anticorodal aluminum and anodized with a 40-micron military-grade treatment, ensuring maximum resistance to wear and salt over time.

To improve the buoyancy and stability of the set up in case of negative trim, floating rings to be mounted on the thinner arm can be purchased separately.

Specifications:

  • Length: 56 cm
  • Weight in water: -345 g
  • Ball diameter: 2,5 cm (1")
  • Depth: -150 m
This pack contains (5)

Write to staff about: Carbonarm Float 6065
Read notice

Complete your experience with these accessories

Floating ring 125 g for underwater use – Carbonarm Floating Ring 125 g FL/RING
Floats

Floating Ring 125 g

FL/RING
€16.39
Tax Excluded
There are not enough products in stock
High-Density Floating Ring for arms for Underwater Use This floating ring is made of high-density closed-cell polyurethane foam, providing excellent strength and durability over time. It is incompressible down to -150 meters, ensuring a constant buoyancy of approximately 125 g, regardless of diving depth. The design features a central Ø25 mm hole,...
Floating ring 150 g for underwater use - Carbonarm Floating Ring 150 g FL/RING/RED
Floats

Floating Ring 150 g

FL/RING/RED
€16.39
Tax Excluded
There are not enough products in stock
High-Density Floating Ring for arms for Underwater Use This floating ring is made of high-density closed-cell polyurethane foam, providing excellent strength and durability over time. It is incompressible down to -100 meters, ensuring a constant buoyancy of approximately 150 g, regardless of diving depth. The design features a central Ø25 mm hole,...
Replacement o-ring kit for Carbonarm strobe-arms- 25 mm Kit o-ring for arms and handles with ball ACC/OR/AR Replacement o-ring kit for Carbonarm strobe-arms- 25 mm Kit o-ring for arms and handles with ball ACC/OR/AR 2
Other Accessories

Kit o-ring for arms and balls

ACC/OR/AR
€2.05
Tax Excluded
There are not enough products in stock
Replacement kit of n.10 O-rings for arms and 25 mm (1") Carbonarm balls.
Velcro kit for Carbonarm underwater arms Kit Velcro ACC/VLC Velcro kit for Carbonarm underwater arms Kit Velcro ACC/VLC 2
Other Accessories

Velcro Kit

ACC/VLC
€16.39
Tax Excluded
There are not enough products in stock
The Velcro Kit is a simple yet extremely useful accessory, recommended for all Carbonarm arm systems or those of other brands. The kit includes 2 Velcro straps, designed to keep your equipment secure during transport. It allows you to lock the arms while transporting on the surface or during water or boat transfers, minimizing the risk of accidental...
Shoulder Strap Kit ACC/TRA/KIT Shoulder Strap Kit ACC/TRA/KIT 2
  • Pack
Other Accessories

Strap and rings kit

ACC/TRA/KIT
€32.79
Tax Excluded
There are not enough products in stock
Strap and Rings Kit Kit consisting of a high-strength, lightweight, and comfortable Cordura strap and two stainless steel rings. The strap allows you to carry your underwater equipment comfortably on your shoulder during surface transfers or between dives. The rings are designed to be mounted on the long clamps of your setup and ensure corrosion...
 
Maximum Guaranteed Depth
150 m
Body
Carbon fiber - Balls and Clamps Anticorodal aluminum,40 micron anodized
Length
56 cm
Diameter
70 mm
Sphere diameter
25 mm
Weight
287 g
Immersion weight
-345 g
ARM/STD6065

You might also like

Carbonarm - Float 60/65 – Underwater Strobe Arm Bundle Alu Light Float 60/65 ARM/STD6065ALU Carbonarm - Float 60/65 – Underwater Strobe Arm Bundle Alu Light Float 60/65 ARM/STD6065ALU 2
  • Pack
Floating Arm Kit in Aluminum

Alu Light Float 6065

CARBONARM
ARM/STD6065ALU
€185.25
Tax Excluded
There are not enough products in stock
Underwater floating arm kit for heavier lights and strobes, composed of: 1 Alu Light Floating 7022 arm 1 Alu Light 18 arm 2 clamps 1 long clamp This floating kit reduces the negative buoyancy in water of lights, strobes and housings, compensating for a weight of about 345 g. The arms with terminal balls, made of top-quality anticorodal aluminum...
Clamp System for underwater photo video housing & arms
How to use XL Clamps
Product added to compare.