• New
Inon SD lens holder for arms ACC/SUP25/ZD
Inon SD lens holder for arms ACC/SUP25/ZD
Inon SD lens holder for arms ACC/SUP25/ZD
Inon SD lens holder for arms ACC/SUP25/ZD

Inon lens holder for arms

€48.36
Tax Excluded

Keep your INON lens attached to your arm: ready when you need it, safe when you don't.

Plastic lens holder designed for Inon additional lenses, to be mounted on Carbonarm carbon arms with a 25 mm diameter. It is secured with two M5 screws, and the lens stays stable and protected throughout the dive.

Available in SD and ZD versions.

Lens Type

Select product's variant

Write to staff about: Inon lens holder for arms
Read notice

Complete your experience with these accessories

 

Use:

When you change framing and no longer need the additional lens, the problem is always the same: where to put it without risking losing it. This lens holder gives you a dedicated spot to park it, right on your arm system.

It locks onto 25 mm Carbonarm carbon arms with two M5 screws and can be rotated 360° around the arm, so you can orient it however you like. Many videographers choose to point it forward or upward, but the best position is the one that suits the way you shoot.

Mount for Inon SD series lenses: to attach the lens, place it on the holder and rotate it until it clicks; to remove it, simply rotate it the other way. No screws to handle and no time wasted, even with gloves on.

Mount for Inon ZD series lenses: to attach the lens, just insert it and rotate it until it clicks. To remove it, press and hold the button at the base of the holder and rotate it the other way. No screws to undo and no complicated steps: it only takes a few seconds, even with gloves on.

Compatibility:

Carbonarm carbon arms with 25 mm diameter. Inon SD and ZD series lenses.

Maximum Guaranteed Depth
250 m
Body
ABS
Height
57 mm
Diameter
72 mm
Weight
47 g
Immersion weight
0,7 g
ACC/SUP25/ZD
Product added to compare.