• New
copy of Inon ZD Lens Adapter ACC/SUP25/ZD
copy of Inon ZD Lens Adapter ACC/SUP25/ZD
copy of Inon ZD Lens Adapter ACC/SUP25/ZD
copy of Inon ZD Lens Adapter ACC/SUP25/ZD
copy of Inon ZD Lens Adapter ACC/SUP25/ZD
copy of Inon ZD Lens Adapter ACC/SUP25/ZD
copy of Inon ZD Lens Adapter ACC/SUP25/ZD
copy of Inon ZD Lens Adapter ACC/SUP25/ZD

Inon ZD lens holder for arms

€48.36
Tax Excluded

Your INON lens always with you underwater: attach it to the arm, grab it when you need it, stow it when you're done.

Plastic mount designed to hold Inon ZD series additional lenses directly on 25 mm diameter Carbonarm carbon arms. It attaches to the arm with two M5 screws and keeps the lens securely in place throughout the dive.

During a dive you often need to remove the additional lens and have nowhere to put it. With this lens holder, the lens stays attached to your arm system, protected and ready to use.

Write to staff about: Inon ZD lens holder for arms
Read notice

Complete your experience with these accessories

 

Use:

The mount clamps onto 25 mm diameter Carbonarm carbon arms with two M5 screws. Once installed, you can adjust its orientation by rotating it freely 360° around the arm: most videographers position it facing upward or forward, but you're free to choose the setup that best suits the way you work.

To attach the lens, simply insert it and rotate until it clicks. To remove it, hold down the button at the base of the mount and rotate in the opposite direction. No screws to undo and no complicated steps: it only takes a few seconds, even with gloves on.

Compatibility:

Carbonarm carbon arms with a 25 mm diameter. Inon ZD series lenses.

Maximum Guaranteed Depth
250 m
Body
ABS
Height
57 mm
Diameter
72 mm
Weight
47 g
Immersion weight
0,7 g
ACC/SUP25/ZD
Product added to compare.