• New
Inon SD lens holder for arms ACC/SUP25/ZD
Inon SD lens holder for arms ACC/SUP25/ZD
Inon SD lens holder for arms ACC/SUP25/ZD
Inon SD lens holder for arms ACC/SUP25/ZD
Inon SD lens holder for arms ACC/SUP25/ZD
Inon SD lens holder for arms ACC/SUP25/ZD
Inon SD lens holder for arms ACC/SUP25/ZD
Inon SD lens holder for arms ACC/SUP25/ZD

Inon SD lens holder for arms

€48.36
Tax Excluded

Keep your INON SD series lens attached to the arm: ready when you reach for it, safe when you're not using it.

Plastic lens holder designed for Inon SD series additional lenses, to be mounted on 25 mm diameter Carbonarm carbon arms. It is secured with two M5 screws, and the lens stays stable and protected for the entire dive.

Write to staff about: Inon SD lens holder for arms
Read notice

Complete your experience with these accessories

 

Use:

When you change your framing and no longer need the additional lens, the problem is always the same: where to put it without risking losing it. This lens holder gives you a dedicated spot, right on your arm system.

It locks onto 25 mm Carbonarm carbon arms with two M5 screws and can be rotated 360° around the arm, so you can position it however you like. Many videographers choose to face it forward or upward, but the best position is the one that suits the way you shoot.

The mount is dedicated to Inon SD series lenses. To attach the lens, place it on the holder and rotate it until it clicks; to remove it, simply rotate it in the opposite direction. No screws to handle and no time wasted, even with gloves on.

Compatibility:

Carbonarm carbon arms with a 25 mm diameter. Inon SD series lenses.

Maximum Guaranteed Depth
250 m
Body
ABS
Height
57 mm
Diameter
72 mm
Weight
47 g
Immersion weight
0,7 g
ACC/SUP25/ZD
Product added to compare.