Your cart
There are no more items in your cart
Accessories
€26.23
Tax Excluded
Open Standard Clamp. The opening part of the clamp allows to direct the arms at different angles.
€31.97
Tax Excluded
Standard Clamp, Long Version.This longer version is particularly suitable to be coupled to the floating arms because it allows the closure to 180 ° but can be safely used even with standard arms.
€34.43
Tax Excluded
Triple Clamp for balls 25 mm (1 inch). The triple clamp allows to use different accessories like pilot light, microcameras, and so on.
€36.07
Tax Excluded
Triple Clamp, Open Version. The triple clamp allows to use different accessories like pilot light, microcameras, and so on. The clamp opening allows to direct the arms at different angles.
€37.70
Tax Excluded
Quadruple Clamp. The quadruple clamp allows to use different accessories, such as pilot light, Go Pro, strobes, arms etc.
€40.98
Tax Excluded
Quadruple Clamp, open version. The open quadruple clamp allows to use different accessories, such as pilot light, GoPro, strobes, arms etc. The clamp opening allows to direct the arms at different angles.
€16.39
Tax Excluded
M6 ball with a diameter of 2,5 cm, complete with a stainless steel screw. Anticorodal aluminum, anodized with 40 microns (military standard) to ensure maximum durability and excellent resistance to wear and to sea salt. It can be easily adapted to different supports, strobes, lights, and so on. An o-ring placed at the center of the ball is acts like a...
€16.39
Tax Excluded
M8 ball, with M8 thread in the lower part and hexagonal insert in the upper part that allows to tighten it with a simple allen key. It is made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. It can be easily adapted to different supports, strobes,...
€16.39
Tax Excluded
M8 Sphere complete thread M3 / 8 at the bottom and insert hex at the top that allows you to hold it with a simple allen key. E'in anticorodal aluminum, anodized and treated military 40 micron for maximum resistance against wear and salt in time.
€16.39
Tax Excluded
Universal ball with a 8mm diameter hole that allows to easily attach different underwater strobes (sea&sea and similar) to to strobe arms and other devices. It is made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. An o-ring placed at the center of...
€16.39
Tax Excluded
Ball with 2,5 cm diameter with Whitworth thread made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. This ball is designed to be mounted on all accessories, both photo and video (for example Go Pro, compact digital cameras, DSLR…) that are arranged...
€16.39
Tax Excluded
M6 ball with blind thread inside, height: 6cm, made out of anticorodal aluminum and anodized with 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt. It can be easily adapted to different arms, strobes, lights, etc.... An o-ring at the center of the ball provides optimal flexibility. The length of 6 cm allows, in...
€16.39
Tax Excluded
Whitworth (Kodak) ball with blind thread inside, made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. It can be easily adapted to different supports, flashes, lights, and so on. An o-ring at the center of the ball is acts like a clutch: the ball...
€16.39
Tax Excluded
M6 ball with inside blind thread, made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. It can be easily adapted to different supports, flash, lights, and so on. An o-ring at the center of the ball acts like a clutch: the ball tightened by the clamp...
€18.03
Tax Excluded
Bayonet base with inside threaded hole M6. It is made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. This accessory can be easily adapted to different supports for various housing models.
€31.97
Tax Excluded
Starting ball composed of a bayonet base and a M6 ball made of anticorodal aluminum and anodized with 40 microns (military standard) 40 microns are used in the production to ensure maximum durability and excellent resistance to wear and to sea salt. This accessory can be easily adapted to different supports for various housing models and allows to easily...
€9.84
Tax Excluded
Starting bayonet with 2 countersunk holes M5. Made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. M5 Screws are included in the price.
€23.77
Tax Excluded
Ball with GoPro adapter tripod. It is made out of anticorodal aluminum and anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt. This special ball allows to mount the GoProcamera to all Carbonarm systems such as polecams, grips, arms, clamps, etc. ... An o-ring at the center of the ball is placed to provide...
€31.97
Tax Excluded
Universal accessory, adaptable to many strobes and pilot lights, complete with 4 o-rings of two different measures to allow to mount lights of different sizes.
€64.75
Tax Excluded
Support for Dive Computers with a Storage Compartment, consisting of a tube in anodized aluminum and a fringe which is fixed bya ball (SF/M6). With a removable cap in Delrin, with O-ring that allows the use of the internal volume of the tube, such as storage watertight. For the configuration shown in the figure, it is recommended to use a Open Triple...
€64.75
Tax Excluded
Support for Dive Computers with a Storage Compartment, consisting of a tube in anodized aluminum and a fringe which is fixed a ball (SF/M6). With a removable Cap in Delrin, with O-ring that allows the use of the internal volume of the tube, such as storage watertight. For the configuration shown in the figure, it is racommended to use a Open Triple Clamp...
€64.75
Tax Excluded
This accessory has the function of "rear-view mirror," applied at the junction of the arms through a triple clamp CP/3 it allows to see what happens behind you.The front part comes with a 67 mm thread that allows to place additional lenses. The side hasM8 threaded holes, Kodak and M6 that allows to place balls SF/M8, SF/WT and SF/M6.
€4.92
Tax Excluded
Kit composed of n.2 stainless steel 316 kodak screws with allen key. This kit allows to fix the housing with kodak thread to Carbonarm trays.
€2.05
Tax Excluded
Kit composed of 10 o-rings for Carbonarm arms and balls with a diameter of 25 mm.
€16.39
Tax Excluded
Kit composed of 2 straps for arms. This Velcro Kit is designed to safely transport your equipment (flash and strobes). With these straps you can lock the arms in the transport position to avoid accidental impacts. Once in the water they can be easily open to allow normal use of the arms.
€118.85
Tax Excluded
Telescopic boat hook made of anticorodal aluminum. This kit comes with 1 terminal ball (SF/M6) that allows to attach micro cameras, cameras, housings, and so on through a single clamp CP/2 (not included) for a remote use from the boat.
€31.97
Tax Excluded
Starting ball composed of a bayonet base 45° and ball made of anticorodal aluminum, anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. This accessory can be easily adapted to different supports for various housing models and allows to easily remove complete arms like Carbonarm kits.
€64.75
Tax Excluded
This kit consists of 4 floating ringsEach ring is made of closed cell high density polyurethane foam, uncompressible until -250 mt and provides a buoyancy of about 125 g . It has a central hole Ø25 suitable for most arms available on the market.
€16.39
Tax Excluded
Floating ring made of closed cell high density polyurethane foam, uncompressible until -250 mt and provides a buoyancy of about 125 g . It has a central hole Ø25 suitable for most arms available on the market.
€81.15
Tax Excluded
Float device made of high density expanded polyurethane with closed cells.
€72.95
Tax Excluded
The Carbon Diffuser is designed to spread the light more smoothly, even in close range. The dome allows you to expand and soften the light of your flash even in waters with great suspension.
€40.16
Tax Excluded
Starting Ball with Quick Release. Buckle not included.Bracket Buckle for Scooter (ACC / SUP / SCO) allows you to connect various products (GoPro Case, Illuminators, etc ...) to a scuba scooter, and be able to quickly remove and reposition them in the water. It is also possible to place the Starting Ball on our housings.
€20.49
Tax Excluded
Bayonet base with 2 inside threaded hole M6. The base can be transformed into a Starting Ball or a 45 ° Starting Ball by inserting a Ball M6 (SF / M6). By inserting 2 Balls M6, it is possible to have a double attack. made out of anticorodal aluminum and anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to...
€34.43
Tax Excluded
Starting ball composed of starting base and M6 ball. It is made out of anticorodal aluminum and anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt. Version with second threaded hole M6, for the insertion of a M6 Ball at 45 °.
€34.43
Tax Excluded
Starting ball composed of starting base and M6 ball. It is made out of anticorodal aluminum and anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt. Version with second threaded hole M6, for the insertion of a Second M6 Ball.
€48.36
Tax Excluded
Starting ball composed of starting base and Double M6 ball. It is made out of anticorodal aluminum and anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt.
€16.39
Tax Excluded
Floating ring made of closed cell high density polyurethane foam, uncompressible until -100 m and provides a buoyancy of about 150 g . Ithas a central hole Ø25 suitable for most arms available on the market.
€64.75
Tax Excluded
This kit consists of 4 floating ringsEach ring is made of closed cell high density polyurethane foam, uncompressible until -100 mt and provides a buoyancy of about 150 g . It has a central hole Ø25 suitable for most arms available on the market.
€18.85
Tax Excluded
Hook with internal stainless steel filment, covered by a plastic sheath. Guaranteed against breakage.
€15.57
Tax Excluded
Spare Battery for CREE 1000 Lumen3.7v 3100mAh Panasonic
€23.77
Tax Excluded
Ball, composed of a ball SF/MC with a diameter 25 mm and a flat contact flash adapter threaded M6, both made out of anticorodal aluminum and anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt. This ball is very useful to mount many accessories directly on housing's hot shoe.
€64.75
Tax Excluded
Suction cup support with 25 mm Ball, which allows the positioning of cameras, action cams, Led Lamps or other accessories, on flat non-porous surfaces.
Application handle that also allows easy removal.
€13.93
Tax Excluded
Anticorodal Aluminum Block, with 4 M6 Threads to insert up to 4 SF / M6 Balls, to a Handle already equipped with IM / SF end ball.
Included in the price is the stainless steel screw to be replaced in the Ball of the handle.
€64.75
Tax Excluded
Helmet for Speleo Sub. Compact, one size Helmet specific for caving. It can be adjusted to all head measures by means of internal PVC straps. It's very strong and light and it has very compact dimension. Many Carbonarm accessories can be applied to this Helmet (for example balls, clamps, adapters) in order to easily use lights and action cam. Thanks to...
- Pack
€109.02
Tax Excluded
Compact, one size Helmet specific for caving.It can be adjusted to all head measures by means of internal PVC straps.It's very strong and light and it has very compact dimension.Many Carbonarm accessories can be applied to this Helmet (for example balls, clamps, adapters) in order to easily use lights and action cam. Thanks to the internal PVC straps all...
€31.97
Tax Excluded
This kit consists of 2 floating part with 4 Screws for Moby Support for PDV. Each part is made of closed cell high density polyurethane foam, uncompressible until -150 mt and provides a buoyancy of about 80 g (40g each part). this kit is necessary to neutralize the fixed support of the Moby.
Accessories for Housing Action Cam
Kit O-ring for Action Cam, Diveshot & ActionDOME Housing
CARBONARM
ACC/OR/ACTION
€8.20
Tax Excluded
O-ring kit for Action Cam & Diveshot housing, includes o-ring replaceable by the end user.
€24.59
Tax Excluded
Quick Release starting base Female
€32.79
Tax Excluded
Starting ball with quick release system. Combined with the product Quick release Male starting base with screw (PAR/SFL) allows you to connect various products (GoPro case, Lights, Arms, etc ...) to an Underwater scooter or any housing, and be able to quickly remove them while submerged and reposition them easily.
€14.75
Tax Excluded
Quick Release Male starting base with Kodak and M6 screw for arms and grips and terminals.
€7.38
Tax Excluded
Zinc spare parts for Carbonarm and Easydive housings. Zinc protects the housing from galvanic currents. It must be replaced depending on how often you use the housing (recommended replacement interval: every two years).
€20.49
Tax Excluded
Ball terminal for Quick Release.Recommended as a spare part for a quick release arms, or to transform a starting base with ball, in a two-Balls support.
€32.79
Tax Excluded
Ball terminal for Quick Release.Recommended as a spare part for a quick release arms, or to transform a starting base with ball, in a two-Balls support.Compatible with Ball M6 or Tripod GoPro or Light Support.
€64.75
Tax Excluded
Fantastic neoprene bag, with shoulder strap included, to comfortably carry your Diveshot. Perfect to protect your housing during transport in Trolley or to reach the diving center in comfort.
€19.67
Tax Excluded
Shoulder Strap for Sleeve Bag to comfortably carry your Diveshot.
€13.11
Tax Excluded
Silicone grease for o-rings. Keeping the o-rings of the housing always sufficiently lubricated is essential for the correct tightness. Carbonarm recommends that you always have a tube of silicone grease near the accessories of your housing.
€9.84
Tax Excluded
Spare cap for M14 threaded hole.
€6.56
Tax Excluded
Stainless Steel Loop to use the shoulder strap through the Long Clamps.
- Pack
€37.70
Tax Excluded
Standard Clamp, Long Version with Shoulder Strap Hook.
This longer version is particularly suitable to be coupled to the floating arms because it allows the closure to 180° but can be safely used even with standard arms.
- Pack
€32.79
Tax Excluded
New shoulder strap for transport on land. Two Inox Loop included to add on the long clamps.
€36.89
Tax Excluded
Standard Clamp, Extra Long Version.This longer version is particularly suitable to be coupled to Two floating arms because it allows the closure to 180 .
- Pack
€43.45
Tax Excluded
Standard Clamp, Extra Long Version.This longer version is particularly suitable to be coupled to two floating arms because it allows the closure to 180°.With the integrated stainless steel ring, it is possible to add a shoulder strap for transporting your photographic set-up to the surface.
€16.39
Tax Excluded
Floating ring made of closed cell high density polyurethane foam, uncompressible until -100 m and provides a buoyancy of about 150 g.