Your cart
There are no more items in your cart
Best sellers
€31.97
Tax Excluded
Standard Clamp, Long Version.This longer version is particularly suitable to be coupled to the floating arms because it allows the closure to 180 ° but can be safely used even with standard arms.
€81.15
Tax Excluded
Float device made of high density expanded polyurethane with closed cells.
€16.39
Tax Excluded
M6 ball with a diameter of 2,5 cm, complete with a stainless steel screw. Anticorodal aluminum, anodized with 40 microns (military standard) to ensure maximum durability and excellent resistance to wear and to sea salt. It can be easily adapted to different supports, strobes, lights, and so on. An o-ring placed at the center of the ball is acts like a...
€26.23
Tax Excluded
Open Standard Clamp. The opening part of the clamp allows to direct the arms at different angles.
€34.43
Tax Excluded
Triple Clamp for balls 25 mm (1 inch). The triple clamp allows to use different accessories like pilot light, microcameras, and so on.
€64.75
Tax Excluded
This kit consists of 4 floating ringsEach ring is made of closed cell high density polyurethane foam, uncompressible until -250 mt and provides a buoyancy of about 125 g . It has a central hole Ø25 suitable for most arms available on the market.
€40.98
Tax Excluded
Carbon fiber arm, lenght: 18 cm, complete with 2 terminal balls in anticorodal aluminum, anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt.
€48.36
Tax Excluded
Carbon fiber arm, size 24 cm, complete with n.2 terminal balls in anticorodal aluminum anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt.
€40.16
€40.16 Tax Excluded
€49.00 Retail Price
€40.16 Tax Excluded
€49.00 Retail Price
€43.36 Tax Excluded
€52.90 Retail Price
€40.16 Tax Excluded
€49.00 Retail Price
€40.16 Tax included
€49.00 Retail Price
€40.16 Tax included
€49.00 Retail Price
€43.36 Tax included
€52.90 Retail Price
€40.16 Tax included
€49.00 Retail Price
Tax Excluded
Correction filter M67
Red, recommended for tropical or Mediterranean waters with excellent visibility.
Orange, recommended for use in tropical seas or in the Mediterranean with excellent visibility.
Magenta, recommended for lake or river waters, to correct the green component.
Yellow, for photos and videos of underwater fluorescence.The filter is to...
€64.75
Tax Excluded
This kit consists of 4 floating ringsEach ring is made of closed cell high density polyurethane foam, uncompressible until -100 mt and provides a buoyancy of about 150 g . It has a central hole Ø25 suitable for most arms available on the market.
€31.97
Tax Excluded
Universal accessory, adaptable to many strobes and pilot lights, complete with 4 o-rings of two different measures to allow to mount lights of different sizes.
€2.05
Tax Excluded
Kit composed of 10 o-rings for Carbonarm arms and balls with a diameter of 25 mm.
€16.39
Tax Excluded
Universal ball with a 8mm diameter hole that allows to easily attach different underwater strobes (sea&sea and similar) to to strobe arms and other devices. It is made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. An o-ring placed at the center of...
- Pack
€89.34
Tax Excluded
Carrying bracket with double grip and balls.The bracket is made of anticorodal anodized aluminum, with holes arranged for grips and housing mounting. The bracket comes with 2 grips and with 25mm balls for the addition of arms or other accessories.
€61.48
Tax Excluded
Kit includes:- A Buckle Bracket for DPV- A Starting Ball with Quick Release System
€11.48
Tax Excluded
Go-Pro tripod Adapter. Thanks to the Go-Pro tripod adapter you can fix your GoPro to any tripod with standard thread (1/4 "-20tpi). Made of polycarbonate and stainless steel bolts and threads.
€36.07
Tax Excluded
Triple Clamp, Open Version. The triple clamp allows to use different accessories like pilot light, microcameras, and so on. The clamp opening allows to direct the arms at different angles.
€23.77
Tax Excluded
Ball with GoPro adapter tripod. It is made out of anticorodal aluminum and anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt. This special ball allows to mount the GoProcamera to all Carbonarm systems such as polecams, grips, arms, clamps, etc. ... An o-ring at the center of the ball is placed to provide...
€23.77
Tax Excluded
Buckle for Monobombola Belt. Indispensable to connect our carbonarm accessories to an underwater scooter.Made of anticordal aluminum and 40 micron anodized.Prepared with 2 M5 threaded holes for fixing a Starting Bayonet (BNT / PT), and a central threaded hole M6 for Fixing a M6 Blind Ball (SF / MC) or for the new start in Sfilo (SF / PT / SF)
€28.69
Tax Excluded
Universal grip made of PVC and anticorodal aluminum, anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. This accessory can be easily adapted to different supports.
€4.92
Tax Excluded
Kit composed of n.2 stainless steel 316 kodak screws with allen key. This kit allows to fix the housing with kodak thread to Carbonarm trays.
Accessories for Housing Action Cam
Protective Film for Action Cam & Diveshot Housing
CARBONARM
ACC/PEL/ACTION
€8.20
Tax Excluded
Protect the back screen of your Action Cam & Diveshot Housing with this Protective Film, Easily applicable and resistant to scratches.
€13.11
Tax Excluded
Adapter for use at all housings and cases, with a Kodak Thread 1/4, with accessories with the gopro mounts.
€22.95
Tax Excluded
Aluminum arm, size 18 cm, with 2 terminal balls, both made of anticorodal aluminum anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt.
€16.39
Tax Excluded
M8 ball, with M8 thread in the lower part and hexagonal insert in the upper part that allows to tighten it with a simple allen key. It is made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. It can be easily adapted to different supports, strobes,...
€61.48
Tax Excluded
34cm carbon fiber arm, complete with 2 terminal balls in anticorodal aluminum anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt.
€245.08
Tax Excluded
Universal support for Housing and Trays, ideal for use on your Underwater Scooter (DPV). Perfect for adding your underwater photography or video recording system to your scooter.
€31.97
Tax Excluded
Lens Adapter for Carbonarm Case for GoPRO, Osmo Action & Insta230 Ace Pro available for the following models:
Inon UFL-G140 SD
Inon UCL-G165 SD
Choose the adapter from the drop-down menu.
€32.79
Tax Excluded
Aluminum arm, size 34 cm, with 2 terminal balls, both made of anticorodal aluminum, anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt.
€327.05
Tax Excluded
Anticordal aluminum housing for Ace Pro & Ace Pro 2, the new born of Insta360 series. 100% Made in Italy, produced by Carbonarm, guaranteed up to -250 meters. Plus Point: Double seals O-ring, Striker and Radial. Prepared for external battery pack, vacuum system, video output and remote control. Double thread for M6 screws or 1/4 Kodak.
Before...
€26.23
Tax Excluded
Aluminum arm, size 24 cm, with 2 terminal balls, both made of anticorodal aluminum, anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt.
€327.05
Tax Excluded
Housing for GoPRO Hero 13, 12, 11, 10 e 9, 100% Made in Italy.
Produced by Carbonarm.com and guaranteed for a depth of 250 meter.Large sized front window for the front screen, which allows you to configure the GoPRO during your dive.
€42.62
Tax Excluded
Arm in compact anticorodal aluminum sphere-sphere, anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. The arm is equipped with a quick release button that allows you to quickly extract various accessories like flash, pilot lights, GoPro, lighting, etc ..., and use them by hand.
€61.48
Tax Excluded
Kit Includes:
- A Buckle Bracket for Scooters
- A Starting Ball with Quick Release System (GoPro Version)
€28.69
Tax Excluded
Tray made of anticorodal anodized aluminum, prepared with holes and slots for grips and housings mounting. This tray is particularly recommended for very compact housings with a single central fixing thread.
Accessories for Housing Action Cam
Kit O-ring for Action Cam, Diveshot & ActionDOME Housing
CARBONARM
ACC/OR/ACTION
€8.20
Tax Excluded
O-ring kit for Action Cam & Diveshot housing, includes o-ring replaceable by the end user.
- Pack
€86.07
Tax Excluded
Tray made of anticorodal anodized aluminum, prepared with holes and slots for grips and housings mounting. This tray is particularly recommended for very compact housings with a single central fixing thread. The tray is complete with n.2 grip model IM/SF where arms or other accessories can be mounted.
€122.13
Tax Excluded
Carbon fiber arm complete with 2 terminal balls in anticorodal aluminum anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt.This arm helps to compensate the negativity in water of lights, flash and housings.
€72.95
Tax Excluded
The Carbon Diffuser is designed to spread the light more smoothly, even in close range. The dome allows you to expand and soften the light of your flash even in waters with great suspension.
€154.92
Tax Excluded
Carbon fiber arm with 2 terminal balls of anticorodal aluminum, anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. This arm helps to compensate the negativity in water of lights, flash and housings.
€7.38
Tax Excluded
Zinc spare parts for Carbonarm and Easydive housings. Zinc protects the housing from galvanic currents. It must be replaced depending on how often you use the housing (recommended replacement interval: every two years).
€16.39
€16.39 Tax Excluded
€20.00 Retail Price
€16.39 Tax Excluded
€20.00 Retail Price
€8.19 Tax Excluded
€10.00 Retail Price
€16.39 Tax Excluded
€20.00 Retail Price
€16.39 Tax included
€20.00 Retail Price
€16.39 Tax included
€20.00 Retail Price
€8.19 Tax included
€10.00 Retail Price
€16.39 Tax included
€20.00 Retail Price
Tax Excluded
Protection Caps for Carbonarm Action Cam Housing.
€28.69
Tax Excluded
Adapter ring for filters or M67 lenses. Recommended for use with GoPRO Hero Case 9, 10 e 11, Ace Pro, Osmo, Diveshot.
€31.97
Tax Excluded
This kit consists of 2 floating part with 4 Screws for Moby Support for PDV. Each part is made of closed cell high density polyurethane foam, uncompressible until -150 mt and provides a buoyancy of about 80 g (40g each part). this kit is necessary to neutralize the fixed support of the Moby.
€16.39
Tax Excluded
Ball with 2,5 cm diameter with Whitworth thread made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. This ball is designed to be mounted on all accessories, both photo and video (for example Go Pro, compact digital cameras, DSLR…) that are arranged...
€37.70
Tax Excluded
Quadruple Clamp. The quadruple clamp allows to use different accessories, such as pilot light, Go Pro, strobes, arms etc.
€64.75
Tax Excluded
27.5 cm carbon fiber arm, with 40 micron anodized anticordal aluminum terminal balls to ensure maximum durability over time and excellent resistance to wear and salt. Version with ball quick lift. It allows you to easily remove the arm from the case to be able to wield the strobe or the light.
€98.36
Tax Excluded
Aluminum Floating arm, complete with 2 terminal balls in anticorodal aluminum, anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt.This arm helps to compensate the negativity of lights, flash and housings underwater.
€36.89
Tax Excluded
Standard Clamp, Extra Long Version.This longer version is particularly suitable to be coupled to Two floating arms because it allows the closure to 180 .
€97.54
Tax Excluded
Carbon fiber arm with 2 terminal balls, anticorodal aluminum anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. This arm helps to compensate the negativity in water of lights, flash and housings.
€16.39
Tax Excluded
M6 ball with inside blind thread, made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. It can be easily adapted to different supports, flash, lights, and so on. An o-ring at the center of the ball acts like a clutch: the ball tightened by the clamp...
€16.39
Tax Excluded
M8 Sphere complete thread M3 / 8 at the bottom and insert hex at the top that allows you to hold it with a simple allen key. E'in anticorodal aluminum, anodized and treated military 40 micron for maximum resistance against wear and salt in time.
€16.39
Tax Excluded
Floating ring made of closed cell high density polyurethane foam, uncompressible until -250 mt and provides a buoyancy of about 125 g . It has a central hole Ø25 suitable for most arms available on the market.
€35.25
Tax Excluded
Carbon fiber arm, size 18 cm, complete with n.2 terminal balls in anticorodal aluminum anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. The Slim version guarantees the same quality and length as the traditional version, with a lower weight.
€40.16
Tax Excluded
Strap band to fix several accessories to your DPV. Compatible with Moby Tray and Kit Buckle with Quick Release.
€28.69
Tax Excluded
Protect your Carbonarm aluminum underwater housing with style and functionality!
The Neoprene Cover is a must-have accessory for anyone who wants to keep their Carbonarm aluminum housing for GoPro, Osmo Action, and AcePro in perfect condition.
€31.97
Tax Excluded
Adaptation tray for the use of Housing for DSLR and Mirrorless or Camcorders, compatible with Moby, Universal support for Scooter.
€16.39
Tax Excluded
Whitworth (Kodak) ball with blind thread inside, made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. It can be easily adapted to different supports, flashes, lights, and so on. An o-ring at the center of the ball is acts like a clutch: the ball...
€40.98
Tax Excluded
Quadruple Clamp, open version. The open quadruple clamp allows to use different accessories, such as pilot light, GoPro, strobes, arms etc. The clamp opening allows to direct the arms at different angles.
€38.52
Tax Excluded
Carbon fiber arm, size 24 cm, complete with 2 terminal balls in anticorodal aluminum, anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. The Slim version guarantees the same quality and length as the traditional version, but provides the advantage of lower weight.
€16.39
Tax Excluded
Floating ring made of closed cell high density polyurethane foam, uncompressible until -100 m and provides a buoyancy of about 150 g . Ithas a central hole Ø25 suitable for most arms available on the market.
€143.44
Tax Excluded
Compact 1300 lumens light for video and photos. The perfect combination of size and power. The 120° beam is perfect for use with GoPro or Smartphones or as a Focus Light for DSLR or Mirrorless.
€18.85
Tax Excluded
Hook with internal stainless steel filment, covered by a plastic sheath. Guaranteed against breakage.
€78.69
Tax Excluded
Flex arm for compact lights, consisting of a handle, 10 joints and a light holder, compatible with 1000 lumens light and similiar. The arm is equipped with an internal safety cable. The Loc Line measurement is 1/2.
€13.93
Tax Excluded
Anticorodal Aluminum Block, with 4 M6 Threads to insert up to 4 SF / M6 Balls, to a Handle already equipped with IM / SF end ball.
Included in the price is the stainless steel screw to be replaced in the Ball of the handle.
€17.21
Tax Excluded
Anticorodal aluminum arm anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. Useful for placing various accessories such as a pilot light for macro, go pro, etc. ...
€6.56
Tax Excluded
Stainless Steel Loop to use the shoulder strap through the Long Clamps.
€86.07
Tax Excluded
50cm carbon fiber arm, complete with 2 terminal balls in anticorodal aluminum anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt.
- Pack
€37.70
Tax Excluded
Standard Clamp, Long Version with Shoulder Strap Hook.
This longer version is particularly suitable to be coupled to the floating arms because it allows the closure to 180° but can be safely used even with standard arms.
€40.16
Tax Excluded
Starting Ball with Quick Release. Buckle not included.Bracket Buckle for Scooter (ACC / SUP / SCO) allows you to connect various products (GoPro Case, Illuminators, etc ...) to a scuba scooter, and be able to quickly remove and reposition them in the water. It is also possible to place the Starting Ball on our housings.
€327.05
Tax Excluded
Anti-chordal aluminum housing for DJI Osmo Action 3, 4 and 5. Made 100% in Italy, manufactured by Carbonarm, guaranteed up to -250 meters Key point: Double O-ring double seal, front and radial radial.Prepared to add an external battery, vacuum system, video output and remote control. Double thread for M6 or 1/4 Kodak screws.
€16.39
Tax Excluded
M6 ball with blind thread inside, height: 6cm, made out of anticorodal aluminum and anodized with 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt. It can be easily adapted to different arms, strobes, lights, etc.... An o-ring at the center of the ball provides optimal flexibility. The length of 6 cm allows, in...
€20.49
Tax Excluded
Bayonet base with 2 inside threaded hole M6. The base can be transformed into a Starting Ball or a 45 ° Starting Ball by inserting a Ball M6 (SF / M6). By inserting 2 Balls M6, it is possible to have a double attack. made out of anticorodal aluminum and anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to...
€15.57
Tax Excluded
Universal grip realized in PVC and anticorodal aluminum, anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. This accessory can be easily adapted to different supports.
€81.15
Tax Excluded
Aluminum Floating arm, complete with 2 terminal balls in anticorodal aluminum, anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt.This arm helps to compensate the negativity of lights, flash and housings underwater.
€13.11
Tax Excluded
Silicone grease for o-rings. Keeping the o-rings of the housing always sufficiently lubricated is essential for the correct tightness. Carbonarm recommends that you always have a tube of silicone grease near the accessories of your housing.
- Pack
€92.62
Tax Excluded
Handle Goodman made of anticorodal aluminum anodized 40 micron for GoPRO cameras and digital camera housings, complete with n.2 balls SF/M6 for lights and additional accessories mounting and GoPro adapter.
€45.90
Tax Excluded
Universal grip made of PVC and cordura, complete kit with 2 balls (SF/M6) anodized with 40 microns (military standard) to ensure maximum durability and excellent resistance to wear and to sea salt.
€31.97
Tax Excluded
30cm tray. Made of anticorodal anodized aluminum, prepared with holes and slots for grips and housings mounting. This tray is recommended for compact housings with a single central fixing thread.
€31.97
Tax Excluded
32 cm bracket made of anticorodal anodized aluminum. With holes arranged for grips and housings fixing. This tray is particularly recommended for compact camera's housings with a double fixing thread.
€15.57
Tax Excluded
Single Arm Flex Terminal, Loc line size 1/2. Included are also 2 pairs of o-rings 25 mm and 35 mm of diameter.
- Pack
€121.32
Tax Excluded
Double tray 25 made of anticorodal anodized aluminum, complete with slots and holes for grips and housings mounting. The upper tray has a double function: the first one is to protect the housing from accidental impacts and the second one is to act as a support for additional accessories. The double tray is complete with 2 grips IM / SF with balls. GoPro...
€53.28
Tax Excluded
24 cm carbon fiber arm, with anodized anticorodal aluminum terminal balls (40 micron military-grade anodization) to ensure maximum durability over time and excellent resistance to wear and salt. Version with ball 25 mm inone side and YS connection in the other side, to be able to directly insert a strobe on the terminal, without the need for a Clamp.
€245.08
Tax Excluded
The UCL-G165 SD lens is a so-called "wide close-up lens" specifically designed for GoPro cameras based on its optical characteristic supporting closer minimum focus distance underwater, enabling high magnification/close-up imaging. Compatible with GoPro Hero Carbonarm with optional adapter (not included).
€23.77
Tax Excluded
Ball, composed of a ball SF/MC with a diameter 25 mm and a flat contact flash adapter threaded M6, both made out of anticorodal aluminum and anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt. This ball is very useful to mount many accessories directly on housing's hot shoe.
€16.39
Tax Excluded
Kit composed of 2 straps for arms. This Velcro Kit is designed to safely transport your equipment (flash and strobes). With these straps you can lock the arms in the transport position to avoid accidental impacts. Once in the water they can be easily open to allow normal use of the arms.
€61.48
Tax Excluded
Kit Includes:
- A Buckle Bracket for Scooters
- A Starting Ball with Quick Release System (Universal Light Version)
€48.36
Tax Excluded
Goodman handle made of anticorodal aluminum, anodized 40 micron. For GoPRO cameras and digital camera housings.
€78.69
Tax Excluded
Flex Arm for compact lights, consisting of a handle, 10 joints and a Ball 25 mm. The arm is equipped with an internal safety cable. The Loc Line measurement is 1/2.
€79.51
Tax Excluded
37.5 cm carbon fiber arm, with 40 micron anodized anticordal aluminum terminal balls to ensure maximum durability over time and excellent resistance to wear and salt. Version with ball quick lift. It allows you to easily remove the arm from the case to be able to wield the strobe or the light.
€45.08
Tax Excluded
Carbon fiber arm, size 34 cm, complete with 2 terminal balls in anticorodal aluminum, anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. The slim version guarantees the same quality and length as the traditional version, but provides the advantage of lower weight.
€16.39
Tax Excluded
Floating ring made of closed cell high density polyurethane foam, uncompressible until -100 m and provides a buoyancy of about 150 g.
- Pack
€68.85
Tax Excluded
Adapter for M67 Filter - Orange Filter included. Compatible with Leo3 Smart and Carbonarm Hero Case 9, 10 e 11.
€14.75
Tax Excluded
Quick Release Male starting base with Kodak and M6 screw for arms and grips and terminals.
€18.03
Tax Excluded
Bayonet base with inside threaded hole M6. It is made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. This accessory can be easily adapted to different supports for various housing models.
€45.08
Tax Excluded
18 cm carbon fiber arm, with anodized anticorodal aluminum terminal balls (40 micron military-grade anodization) to ensure maximum durability over time and excellent resistance to wear and salt. Version with ball 25 mm inone side and YS connection in the other side, to be able to directly insert a strobe on the terminal, without the need for a Clamp.
- Pack
€121.32
Tax Excluded
Double carrying bracket with double grip. The grips end with two 25mm balls.
€13.11
Tax Excluded
Universal grip made of PVC and cordura. This accessory is useful for the transport of photo and video equipments and can be easily adapted to any housing.
€352.46
Tax Excluded
Fisheye wide angle lens for GoPro and Action Cams, allows you to get a viewing angle of 140 ° and a focus at only 4cm from the lens. Compatible with GoPro Hero Case Carbonarm, with the purchase of the special adapter.
€32.79
Tax Excluded
Ball terminal for Quick Release.Recommended as a spare part for a quick release arms, or to transform a starting base with ball, in a two-Balls support.Compatible with Ball M6 or Tripod GoPro or Light Support.
€64.75
Tax Excluded
Helmet for Speleo Sub. Compact, one size Helmet specific for caving. It can be adjusted to all head measures by means of internal PVC straps. It's very strong and light and it has very compact dimension. Many Carbonarm accessories can be applied to this Helmet (for example balls, clamps, adapters) in order to easily use lights and action cam. Thanks to...
- Pack
€136.89
Tax Excluded
Carrying bracket with double grip and balls Quick Release.The bracket is made of anticorodal anodized aluminum with holes arranged for grips and housing mounting. The bracket is complete with 2 grips with balls 25mm for the addition of arms or other accessories. Easily remove your underwater lamps / strobes, for original photos and videos.
€31.97
Tax Excluded
Starting ball composed of a bayonet base 45° and ball made of anticorodal aluminum, anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. This accessory can be easily adapted to different supports for various housing models and allows to easily remove complete arms like Carbonarm kits.
- Pack
€53.28
Tax Excluded
Bracket made of anticorodal anodized aluminum with holes arranged for grips and housing fixing. Recommended especially to add a handle to the Leo 3 Wi housing. The bracket is complete with 1 grip with ball IM/SF for an easy transport of the equipments and the support of arms or accessories.
- Pack
€81.15
Tax Excluded
Goodman handle. Made of anticorodal aluminum, anodized 40 micron, for GoPRO cameras and digital camera housings, complete with 2 SF/M6 balls for mounting lights and other accessories.
- Pack
€89.34
Tax Excluded
Tray made of anticorodal anodized aluminum, prepared with holes and slots for grips and housings mounting. This tray is particularly recommended for very compact housings with a single central fixing thread. The tray is complete with n.2 grip model IM/SF where arms or other accessories can be mounted.
€975.41
Tax Excluded
Aluminum Housing for the Insta360 X3, guaranteed up to -150 meters (Insta360 X3 not included in the price).Make Amazing 360° videos at 5.7k, or use it as an action cam, without ever losing what happens around you. You will be able to decide in post the most interesting shot, changing the scene in long take.We recommend using with Polecam, or with Moby...
€48.36
Tax Excluded
Neoprene cover to protect Housing Insta360 X3/4
€9.84
Tax Excluded
Starting bayonet with 2 countersunk holes M5. Made of anticorodal aluminum and anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. M5 Screws are included in the price.
€69.67
Tax Excluded
27.5 cm carbon fiber arm with anodized anticorodal aluminum terminal balls. Anodized with 40 micron military treatment to ensure maximum durability over time and excellent resistance to wear and salt. Version with Ball Quick Lift and Grip. It allows you to easily remove the arm from the case to be able to wield the strobe or the lamp.
- Pack
€163.11
Tax Excluded
Discover our support for additional lenses and filters, an essential accessory to enhance the performance of your Action Cam housing. Made from durable 40-micron anodized aluminum, it offers excellent resistance and long-lasting durability.
Version with 2 M67 adapters. Possible integration with adapters for INON SD or ZD lenses.
- Pack
€43.45
Tax Excluded
Standard Clamp, Extra Long Version.This longer version is particularly suitable to be coupled to two floating arms because it allows the closure to 180°.With the integrated stainless steel ring, it is possible to add a shoulder strap for transporting your photographic set-up to the surface.
€28.69
Tax Excluded
Cleaning kit for acrylic glass dome ports.
This kit is composed of three types of creams, which, depending on the type of scratch, allow to polish the acrylic dome. The kit includes the polishing cloth.
€19.67
Tax Excluded
Shoulder Strap for Sleeve Bag to comfortably carry your Diveshot.
€32.79
Tax Excluded
Starting ball with quick release system. Combined with the product Quick release Male starting base with screw (PAR/SFL) allows you to connect various products (GoPro case, Lights, Arms, etc ...) to an Underwater scooter or any housing, and be able to quickly remove them while submerged and reposition them easily.
€45.08
Tax Excluded
Grip made of PVC and anticorodal anodized aluminum, complete with open single clamp CP/2A that allows to quickly adjust inclination and angle of the tripod head.
€24.59
Tax Excluded
Bracket made of anticorodal anodized aluminum, with holes arranged for grips and housings fixing. Recommended especially to add a handle to the Leo 3 Wi housing.
€45.90
Tax Excluded
Universal grip made of PVC and cordura, complete with 2 balls SF/MCL anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. This accessory is useful for the transport and passage on the boat of photo and video equipments and can be easily adapted to any housing through the two...
€118.85
Tax Excluded
Telescopic boat hook made of anticorodal aluminum. This kit comes with 1 terminal ball (SF/M6) that allows to attach micro cameras, cameras, housings, and so on through a single clamp CP/2 (not included) for a remote use from the boat.
€24.59
Tax Excluded
Quick Release starting base Female
- Pack
€109.02
Tax Excluded
Compact, one size Helmet specific for caving.It can be adjusted to all head measures by means of internal PVC straps.It's very strong and light and it has very compact dimension.Many Carbonarm accessories can be applied to this Helmet (for example balls, clamps, adapters) in order to easily use lights and action cam. Thanks to the internal PVC straps all...
€69.67
Tax Excluded
27.5 cm carbon fiber arm, with anodized anticorodal aluminum terminal balls (40 micron military-grade anodization) to ensure maximum durability over time and excellent resistance to wear and salt. Version with ball 25 mm on one side and YS connection on the other side to be able to directly insert a strobe on the terminal, without the need for a Clamp....
€45.90
Tax Excluded
Quadruple clamp for Tripod, fundamental for joining elements with balls 25 mm in diameter.
€6.56
Tax Excluded
Block for tray SFF/BRA25. Made of anticorodal anodized aluminum prepared with holes for tray mounting.
€64.75
Tax Excluded
This accessory has the function of "rear-view mirror," applied at the junction of the arms through a triple clamp CP/3 it allows to see what happens behind you.The front part comes with a 67 mm thread that allows to place additional lenses. The side hasM8 threaded holes, Kodak and M6 that allows to place balls SF/M8, SF/WT and SF/M6.
- Pack
€244.26
Tax Excluded
Carbon fiber arms complete with 2 terminal balls in anticorodal aluminum anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt.
- New
€12.21
Tax Excluded
Plastic Button Covers for Underwater Action Cam HousingsThis practical accessory is designed to improve the usability of underwater housing buttons for action cams during dives. Thanks to their larger contact surface, these button covers make pressing easier and more precise, even when wearing diving gloves.Compatible with underwater housings for GoPro,...
- Pack
€409.02
Tax Excluded
Bracket Kit for GoPro Hero Case (Included in the price).
- Pack
€136.89
Tax Excluded
30cm try. Made of anticorodal anodized aluminum prepared with holes and slots for grips and housings mounting. This tray is recommended for very compact housings with a single central fixing thread. The tray is complete with 2 grips and quick release balls.
€104.92
Tax Excluded
The tripod head is composed of 1 special triple clamp open on one side with upper ball CLV/CP3, 1 whitworth ball SF/WT and 1 grip with clamp for tripod CVL/MNG. This tripod can be easily adapted to various housings simply by fixing the housing to the terminal ball.
€15.57
Tax Excluded
Inon SD or ZD Lens Adapter, compatible with the new flip supports for Action Cams and Diveshot.
€975.41
Tax Excluded
Product being restocked, temporarily unavailable.
Aluminum Housing for Insta360 One X4, Depth-Rated to 150 meters (Insta360 One X4 not included).Capture stunning 8K 360° videos or use it as an action cam without ever missing a moment. Decide on the most interesting shot in post-production by changing the scene in a single take.
Completely invisible...
- Pack
€204.92
Tax Excluded
Kit Adapter M67 - Lens Macro Saga +10
€40.98
Tax Excluded
Universal grip, with Multi-Ball Adapter, made of PVC and anticorodal aluminum, anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. This accessory can be easily adapted to different supports. The "M6 Threaded Block for Balls" adapter allows the insertion of another 4 Balls in a...
- Pack
€105.74
Tax Excluded
Flex Arm for compact lights, consisting of a handle, 15 joints and a ball 25 mm. The arm is equipped with an internal safety cable. The Loc Line measurement is 1/2.
- Pack
€199.18
Tax Excluded
Tray made of anticorodal anodized aluminum prepared with holes and slots for grips and housings mounting.
- Pack
€133.61
Tax Excluded
25cm tray. Made of anticorodal anodized aluminum, prepared with holes and slots for grips and housings mounting. This tray is recommended for very compact housings with a single central fixing thread. The tray is complete with 2 grips with quick release balls to mount arms or other accessories.
€48.36
Tax Excluded
Starting ball composed of starting base and Double M6 ball. It is made out of anticorodal aluminum and anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt.
€43.44
Tax Excluded
Triple Clamp for tripod, fundamental for joining elements with balls 25 mm in diameter.
€11.48
Tax Excluded
GoPRO housing male-female adapter.
€64.75
Tax Excluded
Support for Dive Computers with a Storage Compartment, consisting of a tube in anodized aluminum and a fringe which is fixed bya ball (SF/M6). With a removable cap in Delrin, with O-ring that allows the use of the internal volume of the tube, such as storage watertight. For the configuration shown in the figure, it is recommended to use a Open Triple...
€10.66
Tax Excluded
Starting Base Flex Arms, size Loc line 1/2. Included in the prize 1 Screw M6.
- Pack
€251.64
Tax Excluded
Carbon fiber arms complete with 2 terminal balls in anticorodal aluminum anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt.
- Pack
€284.43
Tax Excluded
Carbon fiber arms complete with 2 terminal balls in anticorodal aluminum, anodized 40 microns to ensure maximum durability and excellent resistance to wear and to sea salt.
€48.36
Tax Excluded
Enhance your underwater filming experience with the Inon ZD lens adapter, specifically designed for the Carbonarm aluminum housing for Insta360 Ace Pro and Pro 2.
This adapter is compatible with the Inon lenses UFL-G140 ZD, UFL-GR140 ZD, UFL-GR140 ZD PRO, and UCL-GR165 II ZD, offering versatility and quality for your shots.
- Pack
€441.80
Tax Excluded
Kit for Go-Pro and Action Cam or Compact Cameras, with bracket and slim carbon arms.
- On sale!
€565.57
Tax Excluded
Diveshot R is the new Universal Housing for all iOS and most part of Android Smartphones*.
NewTo date compatible with 5000 smartphone models. Click below to find out if your smartphone is compatible.
Check the compatibility of your Smartphone here
Download the application for free and enable the Bluetooth connection... in this way you can use all the...
€31.97
Tax Excluded
Starting ball composed of a bayonet base and a M6 ball made of anticorodal aluminum and anodized with 40 microns (military standard) 40 microns are used in the production to ensure maximum durability and excellent resistance to wear and to sea salt. This accessory can be easily adapted to different supports for various housing models and allows to easily...
€105.74
Tax Excluded
Flex Arm for compact lights, consisting of a handle, 15 joints and a light holder, compatible with 1000 lumens light and similiar. The arm is equipped with an internal safety cable. The Loc Line measurement is 1/2.
- Pack
€376.23
€490.98 Tax Excluded
€599.00 Retail Price
€376.23 Tax Excluded
€459.00 Retail Price
€490.98 Tax included
€599.00 Retail Price
€376.23 Tax included
€459.00 Retail Price
Tax Excluded
€15.57
Tax Excluded
Lenses centering ring, compatible with the new flip supports for Action Cam and Diveshot.
This accessory helps align your lenses with your camera's lens.
€48.36
Tax Excluded
Is the Neoprene Cover not enough for you? Choose the Strong Cover for Housing Insta360 X3, and you will effectively protect your Dome from accidental shocks or falls.
€64.75
Tax Excluded
Fantastic neoprene bag, with shoulder strap included, to comfortably carry your Diveshot. Perfect to protect your housing during transport in Trolley or to reach the diving center in comfort.
€20.49
Tax Excluded
Ball terminal for Quick Release.Recommended as a spare part for a quick release arms, or to transform a starting base with ball, in a two-Balls support.
€64.75
Tax Excluded
Suction cup support with 25 mm Ball, which allows the positioning of cameras, action cams, Led Lamps or other accessories, on flat non-porous surfaces.
Application handle that also allows easy removal.
- Pack
- Pack
- Pack
€81.15
Tax Excluded
37.5 cm carbon fiber arm, with anodized anticorodal aluminum terminal balls (40 micron military-grade anodization) to ensure maximum durability over time and excellent resistance to wear and salt. Version with ball 25 mm at one side and YS connection at the other side, to be able to directly insert a strobe on the terminal, without the need for a Clamp....
- Pack
€185.25
Tax Excluded
Carbon fiber arms complete with 2 terminal balls in anticorodal aluminum anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt.
€65.57
Tax Excluded
Flex arm for compact lights, composed of 10 joints and a support for lights, compatible with l1000 lumens light device and others. The arm is equipped with an internal safety cable. Recommended to use with Leo3 Smart.
€34.43
Tax Excluded
Starting ball composed of starting base and M6 ball. It is made out of anticorodal aluminum and anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt. Version with second threaded hole M6, for the insertion of a Second M6 Ball.
€236.89
Tax Excluded
Pre Dive system for detection of water infiltration in underwater housings.
€52.46
Tax Excluded
Universal grip, with ball Quick Release, made of PVC and anticorodal aluminum, anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. This accessory can be easily adapted to different supports. Easily remove your underwater lamps / strobes, for original photos and videos.
€114.75
Tax Excluded
Universal grip made of PVC and cordura, comes with 2 balls (SF/M6), anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt and 2 triple clamps (CP/3). This accessory is useful for the transport and passage on the boat of photo and video equipments and can be easily adapted to any...
€64.75
Tax Excluded
Support for Dive Computers with a Storage Compartment, consisting of a tube in anodized aluminum and a fringe which is fixed a ball (SF/M6). With a removable Cap in Delrin, with O-ring that allows the use of the internal volume of the tube, such as storage watertight. For the configuration shown in the figure, it is racommended to use a Open Triple Clamp...
€81.15
Tax Excluded
37.5 cm carbon fiber arm, with 40 micron anodized anticordal aluminum terminal balls to ensure maximum durability over time and excellent resistance to wear and salt. Version with ball quick lift. It allows you to easily remove the arm from the case to be able to wield the strobe or the light.
€67.21
Tax Excluded
Carbon fiber arm complete with n°1 terminal ball and n°1 Universal ball in anticorodal aluminum anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt. advice by the direct use of a flash.
- Pack
€297.54
Tax Excluded
Carbon fiber arms complete with 2 terminal balls in anticorodal aluminum, anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt.
- Pack
- New
€24.43
Tax Excluded
Plastic Button Covers for Underwater Insta360 X3 HousingsThis practical accessory is designed to improve the usability of underwater housing buttons for Insta360 X3 during dives. Thanks to their larger contact surface, these button covers make pressing easier and more precise, even when wearing diving gloves.Compatible with underwater housings for...
- Pack
€128.68
Tax Excluded
Tray made of anticorodal anodized aluminum, prepared with holes and slots for grips and housings mounting. The tray is complete with n.2 grip model IM/SF where arms or other accessories can be mounted.A quick release system is fixed in the center, recommended for swinging the ActionDOME case.
€811.48
Tax Excluded
Housing compatible with GoPro Hero 9/10/11/12/13 and Insta360 Ace Pro
Why settle for 90° when you can have 135?
We designed ActionDOME to keep the field angle unchanged (135°) even underwater, thanks to spherical porthole from 160 mm in diameter. You can also control the case from your phone thanks to a cable antenna (5 or 15 meters).
The essential...
€204.10
Tax Excluded
SeaTouch 4 Max underwater touchscreen housing is a revolutionary design for smartphone to use underwater up to a depth of 60m. For its limitless operation to the touchscreen of the smartphone, you can simply use all the function and Apps of your smartphone.It is World's 1st underwater full touch screen diving housing for smartphone
€72.95
Tax Excluded
Spare rotary plate compatible with the Moby bracket.
Moby description: Universal support for Housing and Trays*, ideal for use on your Underwater Scooter (DPV). Perfect for adding your underwater photography or video recording system to your scooter.
The rotary base with quick release system, will allow you to prepare all your photographic or video...
€176.23
Tax Excluded
Saga lens, made in Spain. During the construction of these lenses the goal was to make them as light and small as possible.The thread is M-67 and the final diameter is 61 mm, this will provide you with a better flash light when you are at the minimum focussing distance, also the smallest diameter that can allow us to further lower the center of the image...
€143.44
Tax Excluded
Saga Lens, made in Spain. During the construction of these lenses the goal was to make them as light and small as possible.The thread is of M-67 and the final diameter of 61 mm, this will provide you the better flash light when we are at the minimum focusing distance, also the smallest diameter that can allow us to further lower the center of the image if...
- Pack
- Pack
€186.07
Tax Excluded
Flat 25cm swing bracket kit with double handles and Flex 25 cm arms.
- Pack
€77.05
Tax Excluded
Bracket made of anticorodal anodized aluminum with holes arranged for grips and housings fixing. Recommended especially to add a handle to the housing Leo 3 Wi/Leo3 Smart or Diveshot. The bracket is complete with 1 grip with quick release ball for an easy transport of the equipments and for the support of arms or accessories.
€34.43
Tax Excluded
Starting ball composed of starting base and M6 ball. It is made out of anticorodal aluminum and anodized 40 microns to ensure the maximum durability and excellent resistance to wear and to sea salt. Version with second threaded hole M6, for the insertion of a M6 Ball at 45 °.
€56.56
Tax Excluded
Removable Sunshade with 4 screws included. Especially recommended for use with iPhone 6 / 6s / 7 and 8, as it eliminates the reflection that can be found in some photo.Possibility of quick removal in dive, to allow selfie photos and videos.
€106.56
Tax Excluded
The tripod head is composed of 1 special quadruple clamp open on one side with upper ball CLV/CP4, 1 grip with clamp for tripod CVL/MNG and a terminal ball Whitworth SF/WT (or SF/M8 on request). This tripod head can be easily adapted to various digital compact housings, Go Pro, ect.. The tripod head can be quickly adjusted by loosening or tightening the...
€225.41
Tax Excluded
Tripod composed of 3 Carbonarm AR18, 1 tripod head CLV/TST and a bayonet slide for tripod-housing coupling CLV/BTT. This tripod can be easily adapted to many housings simply by fixing the terminal ball to the housing.
€147.54
Tax Excluded
Universal grip made of PVC and cordura, complete with n.4 balls SF/M6 anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt and n.2 triple clamps CP/3. This accessory is useful for the transport and passage on the boat of photo and video equipments and can be easily adapted to any...